1 / 2
Ungraded hydroponic tower basin with more holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hydroponic tower basin modified for improved drainage to add 12 6.5 mm outer drainage holes and 12 small inner holes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This modified hydroponic tower basin is based on an original design that worked well but could become clogged and overflow when used with a more powerful pump. This version improves drainage by adding twelve larger 6.5 mm holes around the outer edge and twelve smaller 3.5 mm holes around the inner section. The original basin dimensions, tower connection, and screw receivers remain unchanged. The model is watertight and ready to print.