Wall Hook for Towels & Loofahs – 3D Printable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and practical wall-mounted hook designed for towels, loofahs, robes, and other lightweight items.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall Hook for Towels & Loofahs
A simple and practical wall-mounted hook designed for towels, loofahs, robes, and other lightweight items.
The model consists of two parts: the main hook body and a separate front cap. The cylindrical design gives it a clean, minimal appearance and keeps the model easy to print.
Tested Print
This model has been physically printed and tested on an FDM printer.
Tested with:
PLA
0.4 mm nozzle
0.16 mm layer height
No supports required
Approx. 33 g of filament
Approx. 1 hour 30 minutes print time
The model printed successfully in the orientation shown in the photos.
Model Files
STL files are provided and ready for slicing.
Print time and filament usage may vary depending on your printer, material, and slicer settings.
For bathroom use, PETG is also a good material choice due to its improved heat and moisture resistance.