Finishing/Painting Stand Off
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand off to help with finishing or painting a project.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
These are stand off aids for applying finishes or paints to projects. This way you can apply finish/paint to all sides or faces at once. I could have bought these at any hardware or woodworking store, but I thought "Hey, I have a 3d printer... why not make my own?"
There are two sizes: Small (50mm) and Large (80mm). I've also included storage racks to stack them on. One is designed to mount with rare earth magnets 3/4" x 3/16" (19mm x 4.8mm), the other is for #6 screws.
Supports are optional, depending on the capability of your printer. I used ABS as it is resistant to finishes and paint and can take abuse. ASA, PC, PETG, PCTG are all good options. I suppose you could use PLA, too.
The different color filaments used (as shown in the pictures) was because I was using up left over filament (too short to complete even a small project) so I would not have to waste it.