Finishing/Painting Stand Off
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand off to help with finishing or painting a project.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 52
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
These are stand off aids for applying finishes or paints to projects. This way you can apply finish/paint to all sides or faces at once. I could have bought these at any hardware or woodworking store, but I thought "Hey, I have a 3d printer... why not make my own?"
There are two sizes: Small (50mm) and Large (80mm). I've also included storage racks to stack them on. One is designed to mount with rare earth magnets 3/4" x 3/16" (19mm x 4.8mm), the other is for #6 screws.
Supports are optional, depending on the capability of your printer. I used ABS as it is resistant to finishes and paint and can take abuse. ASA, PC, PETG, PCTG are all good options. I suppose you could use PLA, too.
The different color filaments used (as shown in the pictures) was because I was using up left over filament (too short to complete even a small project) so I would not have to waste it.