1 / 5
Foldable MacBook Air Wall Mount Adapter (VESA 100mm) — zdjęcie 1
1 / 5

Foldable MacBook Air Wall Mount Adapter (VESA 100mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Foldable wall mount for MacBook Air using universal VESA 100mm points, fits almost any TV arm.

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I had a TV mount left in my bedroom from when I moved in, and I didn't have a TV to put on it, so instead of letting it sit empty, I designed an adapter to turn it into a wall-mounted laptop stand.

It uses universal VESA fixation points (100mm), so it fits almost any TV support arm , swing arm, tilting mount, or fixed plate. I mainly use it to hold my MacBook Air.

The design has two open triangular arms that cradle the laptop from underneath, with a back lip so it can't slide off. It's minimal, keeps some airflow around the laptop, and just clips onto the same mounting plate a TV would normally use.

Print settings I used:

  • All parts fit on a single 220mm x 220mm plate

  • PLA, 0.2mm layer height

  • ~20% infill (it's load-bearing)

  • Low support optimization

Hardware:

  • Screws: 10/32 UNC (standard VESA screw size). If you're in a metric-only region, M5x0.8 is the closest practical equivalent.

made a 

Tagi