Braille Keycaps for Logitech MX Mecha - All Keys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Key caps with braille writing for the Logitech MX Mecha keyboard. All keys. All braille characters are standard sizing.
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Braille Key Caps for the Logitech MX Mecha
Standard sized braille characters have been added onto key caps to help the visually impaired with typing.
All Keys Added!
All separate keycaps for every single key on the MX Mechanical have been added. May add more models including multiple keys for easier and quicker printing.
Key count is based on Logitech's files that are provided.
Step-by-step: How to safely remove and insert keycaps (according to Logitech's site):
Power off or unplug your Logitech keyboard.
Use a keycap removal tool (recommended) or gently pry with a flat tool if unavailable.
Pull upward with steady, even pressure to avoid damaging the stem or hinge.
Clean the exposed switch area with compressed air or a soft brush.
Align the new keycap with the stem/hinge of the mechanical switch.
Press down gently until you hear or feel a “snap” into place.
Test the key to ensure it registers properly.
Printing Recommendations:
Two walls for durability
A small nozzle (0.2mm would be best, however 0.4 should work fine)
*Note that the file with all a-z keys has the keys arranged in rows left-to-right in alphabetically, and not QWERTY.
Disclaimer:
Due to a lack of a 3D printer, personal testing of this model hasn't been possible. However research was done on dimensions and careful work has been done on the measurements of the model to help ensure the functioning of this model. If any issues arise with the measurements of this model, I will be happy to rectify these issues where possible.
Likes, makes, downloads and comments are all greatly appreciated. Thank you.