1 / 4
LSC Smart Connect — zdjęcie 1
1 / 4

LSC Smart Connect

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Glass Door Mount (up to 4mm) for your LSC Macro Cam. Perfect 3D printer view! Clips directly onto front glass.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

LSC Smart Connect Camera – Macro Lens Modification Guide

Transform your budget-friendly LSC Smart Connect Camera into a powerful macro lens setup! With just a few quick steps and basic tools, you can easily unlock extreme close-up capabilities—perfect for monitoring 3D prints, inspecting PCBs, or capturing tiny details.


🛠 Step-by-Step Instructions

  1. Open the Casing: Gently pry open the front cover of the camera housing using a small precision screwdriver or prying tool. Work carefully around the edges to release the plastic clips without cracking the plastic.

  2. Disconnect the Cable: Once inside, carefully detach the small connector cable attached to the front ring to prevent any accidental damage while working.

  3. Remove the Factory Lens Lock: Locate the glue holding the threaded camera lens in place. Carefully scrape off the glue around the lens threads using your tool until the lens can rotate freely.

  4. Reassemble & Adjust: Plug the connector cable back in, snap the casing back together, and you're done! You can now manually screw the lens in or out to adjust your close-focus distance and dial in the perfect macro view.

Disclaimer: Proceed carefully and at your own risk, as disassembling your camera will void the warranty.

Uploading...

Tagi