LSC Smart Connect
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glass Door Mount (up to 4mm) for your LSC Macro Cam. Perfect 3D printer view! Clips directly onto front glass.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
LSC Smart Connect Camera – Macro Lens Modification Guide
Transform your budget-friendly LSC Smart Connect Camera into a powerful macro lens setup! With just a few quick steps and basic tools, you can easily unlock extreme close-up capabilities—perfect for monitoring 3D prints, inspecting PCBs, or capturing tiny details.
🛠 Step-by-Step Instructions
Open the Casing: Gently pry open the front cover of the camera housing using a small precision screwdriver or prying tool. Work carefully around the edges to release the plastic clips without cracking the plastic.
Disconnect the Cable: Once inside, carefully detach the small connector cable attached to the front ring to prevent any accidental damage while working.
Remove the Factory Lens Lock: Locate the glue holding the threaded camera lens in place. Carefully scrape off the glue around the lens threads using your tool until the lens can rotate freely.
Reassemble & Adjust: Plug the connector cable back in, snap the casing back together, and you're done! You can now manually screw the lens in or out to adjust your close-focus distance and dial in the perfect macro view.
Disclaimer: Proceed carefully and at your own risk, as disassembling your camera will void the warranty.




