Tube Tee / Cross Connector – 90° Perpendicular Tube Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
90° tube cross connector for 16–22 mm tubing. Mix sizes to connect different tube diameters
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple, strong tube connector designed to join two round tubes at a 90-degree perpendicular angle.
Originally designed for use in grow tents, this connector is useful anywhere you need to add a crossbar, brace, support, equipment mount, or other perpendicular tube connection without permanently modifying the existing frame.
The connector uses two printed pieces that clamp around the intersecting tubes with four M3 screws.
Multiple Tube Sizes
Available for:
16 mm
18 mm ( 1/2" emt )
19 mm
21 mm
22 mm
The two halves can also be mixed to connect different tube diameters. For example, use a 16 mm connector on top and an 18 mm connector on the bottom to join a 16 mm tube to an 18 mm tube.
This makes it especially useful for adapting accessories or additional framing to grow tents that use different tubing sizes.
Hardware Required
Each complete connection requires:
2 printed connector pieces
4 × M3 × 8 mm wood screws
( https://www.amazon.com/Etauwe-100-Piece-Black-Self-Tapping-Screws/dp/B0F9XYX9BQ )
Print Settings
Materials: PLA, PETG, ASA or ABS
Nozzle: .4
Layer Height: Tested at 0.16 mm and 0.20 mm
Infill: 15% Gyroid
Supports: None required
Print the parts in the orientation provided (tube cutout facing up).
Uses
Designed primarily for grow-tent frames, but suitable for other lightweight tube-frame projects such as adding crossbars, equipment supports, sensor mounts, lighting supports, cable-management structures, or custom framing.
The two-piece clamp design allows the connector to be installed on an existing frame without disassembling the tubing.