Gravefang War Gate, Undead Orc Stronghold Entrance | 32mm & 75mm Fantasy Terrain | FDM & Resin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Gravefang War Gate marks the boundary between the lands of the living and territory claimed by the Gravefang Tribe.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Gravefang War Gate marks the boundary between the lands of the living and territory claimed by the Gravefang Tribe.
Built from enormous timbers, scavenged stone, crude ironwork, bone, and trophies taken from defeated enemies, this fortified entrance serves as the primary gateway into Gravefang strongholds. Every surface bears the scars of war—splintered barricades, brutal tribal construction, weathered defenses, and the unmistakable symbols of a tribe that expects its enemies to arrive but never expects them to leave.
Skulls and remains displayed along the gate are more than decoration. They are warnings.
Gravefang shamans bind fragments of fallen warriors' spirits to the structure, allowing the dead to watch over the entrance long after their bodies have decayed. Raiders approaching beneath the gate sometimes claim to hear whispers coming from the walls or see empty skull sockets following their movements.
During war, the gate becomes the center of the stronghold's defenses. Archers and sentries occupy the surrounding fortifications while warriors gather behind the entrance waiting for the command to charge. When the Blackbanner rises above the walls, the gates open and the Gravefang horde pours onto the battlefield.
The Gravefang War Gate works as a dramatic centerpiece for fortress assaults, RPG encounters, siege scenarios, settlement entrances, dioramas, and full Gravefang-themed battlefields. Combine it with additional Gravefang structures, towers, barricades, and scatter terrain to create a complete tribal stronghold.
Perfect
for resin or FDM
printing, this model offers crisp,
painter-friendly detail and a dramatic silhouette—ideal for
tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly
elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high-detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings: Layer Height: 0.05 mm; Bottom Layers: 5; Exposure Time: 2.75 s; Bottom Exposure Time: 37 s; Transition Layers: 10 (Linear); Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s.
Advanced Settings: Anti-Aliasing: Level 8; Print Time Compensation: Enabled (0.93 s); Light PWM: 255; Bottom Light PWM: 255.
Supports & Orientation: Use Auto Orientation and Auto Supports (Light) in ChituBox. Ensure proper drainage and avoid flat surfaces directly on the build plate.