BeanSwap – Hopper Pouring Lid for Ninja AutoBarista
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BeanSwap is a snug-fitting pouring lid that helps you empty your Ninja AutoBarista hopper into a bag or container.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Switch beans without the mess! BeanSwap is a snug-fitting pouring lid that helps you empty your Ninja AutoBarista hopper into a bag or container. Its corner opening guides the beans for a more controlled pour.
Designed and tested on my own hopper, with an excellent fit and good results in everyday use.
Important: Always hold the hopper and lid firmly together while pouring. The snug fit is not a locking mechanism. Fit may vary with print settings.
Independent accessory, not affiliated with Ninja.
Printing Notes
The pictured model was printed in PETG without supports. This print achieved an excellent fit on my hopper and worked well in practical testing.
Material used: PETG
Supports: None
Fit: Printer calibration and material shrinkage may affect the fit. Check before use and always hold the lid and hopper firmly together while pouring.
Food-contact note: PETG alone does not guarantee a food-safe print. Filament additives, printing equipment, and cleaning also matter.