HiFi Berry Amp 2 Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for Raspberry Pi with HiFiBerry Amp2 HAT.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Full Project Details and Docs: https://github.com/AnotherMike-exe/HiFiBerry-Housings
Amp2
Exploded view:
 |  |
 |  |
Files:
File | Purpose |
|---|---|
| Orca/Prusa Slicer print file for Part A. |
| Orca/Prusa Slicer print file for Part B. |
| STEP file, all parts, for other CAD tools. |
| Combined STL mesh, all parts, for slicers without STEP or 3MF support. |
| Native Rhino source file. |
Print settings:
PETG, multi-material, standard-profile layer height, 15% infill.
Hardware used:
Item | Value |
|---|---|
Heat-set inserts | (4) M3, Voron-spec |
Standoffs | (4) M3 x 12mm motherboard standoffs |
Screws | (4) M3 x 6mm |
Build steps:
Install the (4) heat-set inserts into the top piece (the green part shown in the pictures).
Mount the Amp2 board to the top using the (4) M3 x 12mm standoffs into the heat-set inserts.
Place the Raspberry Pi onto the standoffs, and attach with the (4) M3 screws.
Snap the bottom housing piece onto the assembly.
Attributions
Base design: Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands by Malolo, licensed under CC BY-NC 4.0.
This remix is released under the same license: CC BY-NC 4.0. Use, modify, and remix freely for non-commercial purposes, with credit to Malolo for the base design and to this repository for the HiFiBerry-specific changes.
HiFiBerry is not affiliated with this project.