62 modeli
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
My first remix design for a 3D print! I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer. RPi4B case:…
This is a remix of the original PI4B Adapter case from Bigtreetech. Changes: Chamfer near the DSI port exit to avoid supports. Holes where to screw the CB1 and heatsink, both with M2.5 nuts or screw on plastic. Bigtreetech logo/name…
Happy 10th anniversary to the Raspberry Pi! Description This is the Case for the Raspberry Pi 4 B. There are 2 types of top covers. Slot-in I/O cover type. Cut-out I/O cover type. There are 3 types of bases parts. with tabs (for wall…
A Raspberry Pi4B case that attaches to the rails so you can mount it behind the LCD.
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
This is a simple enclosure for the BigTreeTech PiTFT50 V2.0 screen assembly with a Raspberry Pi 4B mounted inside. The BTT mounts into the case with holes for the screw bosses and is secured from the back side with small metric screws…
This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the Raspberry PI 4 Model B with a Noctura 5V 40mm fan.
This Case was created by/for BiblioTech Sans Frontieres, consider supporting them please. https://www.librarieswithoutborders.org/ New Version June 2024 larger, better cooling, better fit, easier assembly, etc This case is for the…
The problem I had is that the supports didn't allow for a surface finish that I liked. This Model has integral supports, that need to be popped off when the print is done. Before assembly. I optimized the design for printing in a specific…
Easy to assemble box for 4x SSD and Rpi4B. It can serve as a home NAS server. Passive cooling.
This has all of the changes from my previous remix of this case, but with the addition of the thicker bottom and the hole pattern for Voron DIN clips. It has built-in supports, so you shouldn't need to add any. If you are using…
HexCase2 is a Pi 4B case that fits the POE Hat from Raspberry and many other Hat boards… This case will need a new Case Bracket in order to mount onto the Prusa Mk3 frame. The Stand keeps the Pi4b PCB in place from the fit/force of the…
Multifunctional Adapter Case for Raspberry Pi5 (& Pi4B Updated)(& Pi4B Updated) **** UPDATE 09OCT25 **** As requested I have Added the file "Multi Pi4B Case v46" which suits the Pi4B Eth and USB connector arrangements.…
Remix of a remix here. First, I ran the bottom through netfabb which resolved a lot of errors. Second, I remixed the top to significantly short the screw pole closest to the GPIO pins. This allows one to use a Pimoroni Fanshim inside the…
A mount designed for the compact aluminium RPI4B case by Geekworm. It is designed to use the entire case without having to sacrifice a part of it resulting in better cooling. 2.5x12 or 16 screws can be used to connect the mount to the…
Still in Beta! - Send me messages/concerns This design builds off a commonly used design by RC-CnC on PrusaPrinters. This improved case includes room for a Pi4B+, uses threaded inserts, allows for 2 x 40mm fans, and utilizes magnets to…
I remixed the only case out there for the CB1 and Pi4B as i didnt want the hump or the fan. I also added a rail to fit the case to my Ender 3 Pro extrusion. Clipped the top, added flat cover, amended some of the holes slightly and all…
Here is a PI4B adapter case with rail mount. I only remixed the top part of the original BTT model.
I carelessly printed and struggled to fit the display case that I have remixed here, not noticing until I had ripped the OSD rocker switch off, that my display was not the one for which that case was designed. I therefore had to model…
This case mount is a remix for a Rpi4b of the Rpi3b Prusa Mk3 Frame Mount Case by 3D_Dynamics. It works perfect in the Prusa MK3. The half hexagon on the end of the arm hooks into the hexagonal cut out on the top of the z axis, and the…
*zadní část se tiskne jako 1 ks. pod úhlem s podpěrami - v modelu je pomocná ploška na uchycení k podložce (navazovat bude otočné / sklopné chycením na rám tiskárny )
Enclosure for Raspberry Pi 4B that fits under an Ender 3 bed carriage. It has cutouts for all the Raspberry Pi4 ports , a 12x12mm push button to wake up the Pi and a rocker switch for the LEDs. On the back, it has holes for a DC port and…
This RPi 4B and SSD mount is designed to be as compact as possible. I wanted to use it with standard commercial brackets as I find them to be bit better strength and elasticity compared to the 3D printed ones. Everything is printed out of…
Same case as this but without the need for ANY supports, because TXBillbr was having issues.
A case to hold both a Raspberry Pi4b and a 2.5" SATA SSD (or normal HDD for that matter). The pi is mounted on top of the SSD using the ssd tray part, and they are in turn held into the case by the SSD. A fan is mounted in the top of the…
I'm a big fan of BigTreeTechs Pi4B Adapter for the CB1/CM4. I had several lying around and wanted to add OctoPrint to my Wuxn3D WXR but since its a beautiful machine, I didn't want to modify it in any way. So, I threw together this…
The original case was designed to slide into the slot on an Ender 3 frame. I remixed the original model to attach it to the rail slot using M5 bolts and T-Nuts versus the original rail design. Bolting stops the case from sliding along the…
This is a remix from https://www.thingiverse.com/thing:2407893 I designed this to take a WD passport portable HDD and have room for an Ice Tower cooler so the Pi stays cool when running RetroPie. Print instructions Parts needed: Pi4b…
Designed this enclosure to use it on my LongerLK5. So it is meant to be attached with T-nuts to the aluminium extrusion. In the cornes of the case, there are holes for M3 heat inserts.
Remixed version of Jerlo's Bear case with updated geometry and a Cybertronian flair.
Low profile Case for Raspberry Pi4B It allows easy access to the GPIOs, 15mmx15mm heatsink Hardware needed: 4x M2.5x6mm screws to secure the board to the bottom case 8x 6mmx3mm circular magnets
For fixing I used M3x25 screws.
General Info A snap-fit case for a Raspberry Pi 4 Model B with a vent for a 30 mm PWM fan. Center-to-center hole distance: 24 mm. Hole diameter (on model): 2.6 mm. Example of PWM fan used:…
Thanks to "John U" for his great Raspberry PI4 case. Really nice work. Perfect fit, screwless assembly, low profile, (with little material). My only problem was that I bought an adxl-345 accelerometer and mounted jst connectors on its…
Especially for those in my situation: where the USB port broke off of my 3D printer's board, and the only option - besides replacing the board - was to connect the Raspberry Pi to the board via the GPIO pins. (In my case, this has meant…
Mount Raspberry Pi 4 horizontal with USB ports facing the rear and fan pointing up. Right angle USB-C adapter required.
3010 fan frame is custom, since I have a custom heat sink on my CB1. You have to drill the holes of the fan a bit bigger. The washers are meant to go under the CB1, so the screws can be inserted underneath the PI4B board.
This mount is for a Prusa Mk3 and raspberry pi 4b. The only difference between this and the original is removal of the punch-outs and a different style of vent.
A very rough mod for PiTFT50 V2 to the Anycubic Vyper, it uses the bracket from the original screen for the left or right side of the printer (the left side is under a different angle and is mounted on the top side of the bottom extrusion…
Modified to remove the redundant support leg and use M3 socket head screws The attached 3mf/STEP files are slightly different to the images… I modelled the support legs in the wrong position which made the case sit 7mm lower than the…
I saw a similar model from another user, but not as expandable, so made this to hold P4b or P3b for as many as you have.
!!!!! The printed parts are not verfied yet ! !!!!! !!!!! I just made this page in advance before last verification of 3d files !!!!! These are mounts for electronic parts in a typical Klipper hardware setup. There are : Raspberry Pi 4B…
PI4B Adapter case top whit 30mm fan This is a remix of the original PI4B Adapter case from Bigtreetech. Use original buttom
Mount a Raspberry Pi4b with a passive cooling case to a Prusa Mini Rail. The cooling as is a GeekWorm Pi Armor case.
This version adds mounting holes that allow you to securely attach either a 40x10mm (4010) or a 30x10mm (3010) cooling f
Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…
Tato krabička slouží pro uschování tiskařského ovládacího panelu. Osobně ji umístním do boxu pro tiskárnu. Hledal jsem nějaké řešení jak RPI4B s dvouma relé schovat a zároveň udělat nějak pěkné. Tohle je první verze, uzavírání je řešeno…
You've just stumbled upon a Case Enclosure Mount for your Ender 3-3 Pro /w Raspberry Pi 4 Model B & Hosyond 7" Touchscreen IPS Display. Upgrading your Ender 3? Hate your puny Ender 3 colorless BLUE LCD display? Or... Maybe you've upgraded…
This remix was created to accommodate the E3P_RPi4b_Hosyond_TIPS_Display (Case Enclosure Mount).
If you want to mount a Raspberry Pi 4B on a 3D printer with a 4040-profile frame, like the Anycubic Vyper, then this model is perfect for you. Print instructions PLA is recommended infill >30% quality <0.22mm Parts (Optional): 4x 3Mx8…
I designed this enclosure to reuse a spare BTT CB1 module and Pi4B Adapter after upgrading my BTT Manta M8P setup from the CB1 to a Raspberry Pi CM4. The enclosure makes it easy to repurpose existing hardware for useful home-network…
You've just stumbled upon a Case Enclosure Mount for your Ender 3-3 Pro /w Raspberry Pi 4 Model B & Hosyond 7" Touchscreen IPS Display. Upgrading your Ender 3? Hate your puny Ender 3 colorless BLUE LCD display? Or... Maybe you've upgraded…
This remix was created to accommodate the E3P_RPi4b_Hosyond_TIPS_Display (Case Enclosure Mount).
Following the basics of the original model, I quickly whipped this up to fit my generic Amazon OLED's ( Hosyond 5 Pcs 0.96 Inch OLED ). Nothing special, but the original slots didn't line up for me very well. I used standoffs for the…
Pi4b case with space for a 30mm fan to be mounted internally. Also allows access to pi pinout with a removable guard. Primarily designed to be used with the SV06 rail mounting system from bassamanator but could be adapted to other…
https://www.patreon.com/posts/38832324
OVERVIEW My main Octoprint/Octodash Pi4b has a GeekWorm “armor” case , which does a pretty solid job of passive cooling on its own, but as I've been overhauling my print enclosure, I wanted to rackmount it to de-couple it from the…
This is a simple screw together case for the BigTreeTech Pi4b adapter board. No supports required, printed in PLA. This is the same layout as the Raspberry PI 4 but without the hole for the audio socket. I originally designed it to use M3…
I have designed a case for the Raspberry Pi holder from Freeviv. This case can be attached to the side of a surface. When you want to use the Raspberry Pi, you can simply slide it into the holder and connect it. This design offers a…
