The E3P_RPi4b_Hosyond_TIPS_Display (Case Enclosure Mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Case Enclosure Mount for the Ender 3-3 Pro w/ Raspberry Pi 4 Model B & Hosyond 7" Touchscreen IPS Display.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
You've just stumbled upon a Case Enclosure Mount for your Ender 3-3 Pro /w Raspberry Pi 4 Model B & Hosyond 7" Touchscreen IPS Display.
Upgrading your Ender 3?
Hate your puny Ender 3 colorless BLUE LCD display?
Or... Maybe you've upgraded your Ender 3 Pro and need an Enclosure/Case/Mount for your RPi4B and a new 7" Hosyond Touchscreen IPS Display?
This model replaces the Ender 3 LCD Display in favor for the 7" Hosyond Touchscreen IPS Display for the Raspberry Pi 4 Model B.
This Case Enclosure Mount has only been tested with a Raspberry Pi 4 Model B but the IPS display is compatible with the Raspberry Pi 5/4/3.
7" Hosyond Touchscreen IPS Display
This print is also compatible with a Remixed Version of the Ender 3 Pro Motherboard Case by Nick Berardi
Images coming soon!
The 1 image is a mockup of an earlier draft print before I remixed Nick Berardi's remix. My printer is being modified and the need for this came about so more print/printer/assembly images will come as I continue to finish my Ender 3 Pro's upgrades parts list.
The print in this image is not the final product in the STL files listed.
The model tolerances are mid to high so make sure your printer is dialed in.
Installation Method:
Assemble your RPi to the Hoysund display's built-in RPi standoffs.
Place the IPS Display Base into the CEM (Case Enclosure Mount).
Slide the assembled unit into the CEM over the IPS Display Base.
Insert and tighten down 4 screws between the CEM and IPS Display outer standoffs. This will secure the unit to the CEM.
Slide the Bezel over - Friction Fit.
If using the Ender 3 Pro Motherboard Case by Nick Berardi, please ensure you print my remix to allow compatible fitment.
Slide the CEM into the 4040 Aluminum Rail, fasten secure with existing hex screws.