1 / 2
BTT CB1 Pi4B case with mounting holes for Voron DIN clips — zdjęcie 1
1 / 2

BTT CB1 Pi4B case with mounting holes for Voron DIN clips

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of MDFPereira's BTT Pi4B case, but with a thicker bottom and holes for Voron DIN clips.

Ocena
5 / 5
Polubienia
19
Pobrania
244
Wydruki
2
Wyświetlenia
1265
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This has all of the changes from my previous remix of this case, but with the addition of the thicker bottom and the hole pattern for Voron DIN clips.

It has built-in supports, so you shouldn't need to add any.  If you are using PrusaSlicer or Cura, these models should import in the correct orientation for the integral supports to work.

 

To assemble the case you will need 6 m3x12 socket head cap screws and 2 m3x10 socket head cap screws for the upper and lower halfs.  

You will also need 4 m2x8 socket head cap screws to attach the DIN clips to the case.