BTT CB1 Pi4B case with mounting holes for Voron DIN clips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of MDFPereira's BTT Pi4B case, but with a thicker bottom and holes for Voron DIN clips.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 244
- Makes
- 2
- Views
- 1,265
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This has all of the changes from my previous remix of this case, but with the addition of the thicker bottom and the hole pattern for Voron DIN clips.
It has built-in supports, so you shouldn't need to add any. If you are using PrusaSlicer or Cura, these models should import in the correct orientation for the integral supports to work.
To assemble the case you will need 6 m3x12 socket head cap screws and 2 m3x10 socket head cap screws for the upper and lower halfs.
You will also need 4 m2x8 socket head cap screws to attach the DIN clips to the case.
