Terrifying Ghost Keychain V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keychain version of Absolutely Terrifying Ghost
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 245
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution
Meet your new spooky sidekick! This little ghost keychain is a quick, fun print that looks great clipped to your keys, backpack, or zipper pull. It's a single-part model, so there's no assembly, and it makes a good filler print for Halloween, craft fairs, or stocking stuffers.
V2 - Bigger keychain ring
Model details
Size: approx. 43 × 27 × 45 mm (W × D × H
One part, no assembly
Small enough to print in couple minutes on most printers, and you can fit several on one bed
Recommended print settings (a starting point, so adjust for your printer)
Layer height: 0.2 mm
Infill: 15–20%
Walls: 3 perimeters, so the key ring hole stays strong
Supports: none should be needed when printed upright, but check your slicer preview
Material: PLA or PETG. White or glow-in-the-dark filament suits it best.
Tips
Glow-in-the-dark PLA makes it extra spooky.
Try a color change for the eyes, or paint them on with a paint pen.
Print a whole batch in different colors and make a ghost gang.
Use a split ring or a small carabiner to attach it.