1 / 3
Mod of AS5600 encoder Nema17 stepper motor mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod of "AS5600 encoder Nema17 stepper motor mount" by mangoByte
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Since attaching a magnet to the Nema 17 shaft is difficult, I added an alignment jig designed to fit into the holes on the Nema 17 housing.
Adhesive is used to attach the magnet
2 of M3 35mm socket head bolts are used to attach the mount to Nema17