1 / 1
Beelink MiniS to D or V Series Dovetail Clamp — zdjęcie 1

Beelink MiniS to D or V Series Dovetail Clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to connect a Beelink MiniS to a D or V series dovetail adapter.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Description

Mount your Beelink MiniS (or similarly sized) mini PC to a dovetail with this 3D-printed adapter. It is designed for Aperturea D or V series clamps and is likely compatible with any clamp that uses 35mm screw-hole spacing and M8 screws.

The adapter includes slots sized for 25mm wide hook-and-loop strips. The slot openings are shaped to let the strips pass below the clamp without interference, which allows strip replacement without removing the clamp from the adapter. 

Required Parts

  • Four M8 x 8mm x 10mm threaded inserts  

  • Two M8 screws compatible with your clamp

  • 25mm wide hook-and-loop strip, long enough to wrap around the adapter and mini PC

Print Recommendations

  • Print in PETG, PLA, or another filament suitable for your application.

  • Print with the slots facing up

  • 3-5 perimeters

  • 40% infill