1 / 1
Beelink MiniS to D or V Series Dovetail Clamp — image 1

Beelink MiniS to D or V Series Dovetail Clamp

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to connect a Beelink MiniS to a D or V series dovetail adapter.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
9
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Description

Mount your Beelink MiniS (or similarly sized) mini PC to a dovetail with this 3D-printed adapter. It is designed for Aperturea D or V series clamps and is likely compatible with any clamp that uses 35mm screw-hole spacing and M8 screws.

The adapter includes slots sized for 25mm wide hook-and-loop strips. The slot openings are shaped to let the strips pass below the clamp without interference, which allows strip replacement without removing the clamp from the adapter. 

Required Parts

  • Four M8 x 8mm x 10mm threaded inserts  

  • Two M8 screws compatible with your clamp

  • 25mm wide hook-and-loop strip, long enough to wrap around the adapter and mini PC

Print Recommendations

  • Print in PETG, PLA, or another filament suitable for your application.

  • Print with the slots facing up

  • 3-5 perimeters

  • 40% infill