1 / 3
Shell68 — zdjęcie 1
1 / 3

Shell68

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are reusable wadding for firing 6mm BBs from breech loading paintball guns like the Umarex T4E HDS68. I've found…

Ocena
0 / 5
Polubienia
6
Pobrania
59
Wydruki
0
Wyświetlenia
797
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

These are reusable wadding for firing 6mm BBs from breech loading paintball guns like the Umarex T4E HDS68. I've found that a mix of steal and paintball 6mm BBs works best.

Print:

1 Base

2 Sides

2 Cap .5 (Optional)

Connect the two sides to the base. It has ~6mm hole at the top for loading BBs. Optionally add a cap. The completed shell should be then stable enough to hold, but still separate as it leaves the barrel.

I have a few experiential caps:

  • Deconstruction is angled inwards to promote pushing the two halves apart when fired.
  • Spinning should open up the shot by having the wadding spin.

I've not tested these enough to know if this actually works.

Notes:

  • These are very tight in the barrel. It needs a bit of force to load.
  • Even with the 12ft lb model the individual pellets are quite weak.

Print Settings

Printer:

Rotrics DexArm

Rafts:

No

Supports:

No

Resolution:

200

Infill:

38

Filament:

PolyMaker PETG

Category: Sport & Outdoors

Tagi