Gaggiuino P4 4.3" Screen Housing (Gen 3.5)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screen housing for the Gaggiuino 3.4" ESP32-P4 screen. Compatible with the Gen 3 ESP32-S3 screen mounts.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 104
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a screen housing for the Gaggiuino 3.4" ESP32-P4 screen. It's compatible with the Gen 3 ESP32-S3 screen mounts - Front, Rear, and Funnel (see https://www.printables.com/model/356026).
Hardware needed (screen housing only):
4 M2 x 6 mm Flat Head Screws
Rear or Funnel mounts only (optional) - Thin (<3 mm) zip-tie
Print Settings:
PETG (PLA and ABS won't work due to flexible features)
0.4 mm nozzle, 0.2 mm layer height
6 top and 6 bottom shell layers so the rear prints solid
If your printer can't print hit tolerances of +/- 0.15 mm these prints may not work.
Notes:
Older (~2024) Gen 3 mounts are all compatible, though the Rear and Front mounts have been updated for additional clearance.
The original Rear Mount will reduce the maximum angle by ~10 degrees due to wire pathing. Please print the new version if higher screen angles are required.
The screen PCB displays a Guition JC4880P443C-I-W part number but that screen was customized - this housing is not compatible with an unmodified screen.