Gaggiuino P4 4.3" Screen Housing (Gen 3.5)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screen housing for the Gaggiuino 3.4" ESP32-P4 screen. Compatible with the Gen 3 ESP32-S3 screen mounts.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 136
- Makes
- 0
- Views
- 640
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a screen housing for the Gaggiuino 3.4" ESP32-P4 screen. It's compatible with the Gen 3 ESP32-S3 screen mounts - Front, Rear, and Funnel (see https://www.printables.com/model/356026).
Hardware needed (screen housing only):
4 M2 x 6 mm Flat Head Screws
Rear or Funnel mounts only (optional) - Thin (<3 mm) zip-tie
Print Settings:
PETG (PLA and ABS won't work due to flexible features)
0.4 mm nozzle, 0.2 mm layer height
6 top and 6 bottom shell layers so the rear prints solid
If your printer can't print hit tolerances of +/- 0.15 mm these prints may not work.
Notes:
Older (~2024) Gen 3 mounts are all compatible, though the Rear and Front mounts have been updated for additional clearance.
The original Rear Mount will reduce the maximum angle by ~10 degrees due to wire pathing. Please print the new version if higher screen angles are required.
The screen PCB displays a Guition JC4880P443C-I-W part number but that screen was customized - this housing is not compatible with an unmodified screen.