Counting matching models…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
There is one main screen housing design, multiple mounting options. The Front mount is compact and needs fewer parts but is at a fixed angle and can be low for taller people. The Rear mount takes up more space and uses more parts, but the…
Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…
Status: Released! Compatibility Warning! PCBv3.1 and PCBv4 (with onboard STM32 chip) are the only compatible PCBs. PCBv3 (which uses the WeAct BlackPill) is not compatible and should use the Protective Housing . Description This housing…
This housing is designed to hold the Time of Flight and LED (ToFnLED) board for Gaggiuino over the water tank using magnets. The board slides in from the end, clipping in with the flex arm clip. If the board needs to be removed it can be…
Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic control project using microcontrollers. (github.com) Discuss: Gaggiuino Builders | Facebook You can buy these printed here at www.matter-replicator.com For use with…
This purpose of this optocoupler case is to provide an easy upgrade path for those who want to start with the Arduino Gaggiuino build in a Gaggia Classic and then upgrade to the STM32 Blackpill. Print this case for use with an Arduino…
Gaggiuino and IUIUIU branded Gaggia Classic | Pro drip tray cover with files for 3D printing, laser cutting, or sheet metal fabrication. Print: PETG, 4+ top and bottom layers, make sure layer adhesion and flow is good. You don't want…
Here is a range of cases to enclose a 2.4", 2.8" or 4.3" Nextion screen for the Gaggiuino project. The case mounts magnetically to the front of the Gaggia Classic using 2 (or 4 if you want to be really secure) 60x10x3mm Neodymium magnets.…
Simple bolt used to hold the screen in place for the Gaggiuino
NOTE: For an easy upgrade path to the STM32 Blackpill build print the Gaggiuino Component Housing and Gaggiuino Optocoupler Case (for GC) instead of this. The housing was originally designed for M2.9x6.5 self-tapping screws. These are the…
Status: Released Description: This design houses the Gaggiuino Headless E177 PCB and provides mounting options for the outside of an espresso machine. Lights, buttons, and USB-C port are accessible with the case installed. There are 2…
I printed on an Ender 3, using default settings except for 0.12mm layer height and matte PLA (for aesthetic reasons), 50% gyroid infill, and support material for overhangs >60deg. The screen is flipped 180 degrees vs the default build, so…
Nextion 2.4 inch display enclosure that fits the front panel of Rancilio Silvia V6. Intended to be used as part of a Gaggiuino install. The design leverages the V6 power and boiler indicator lights to route the wires to the screen. It…
I wanted a 20 degree front screen mount for the new Gaggiuino Gen 3 housing that had consistent outer surfaces, surrounded the switches, and preserved the outer status lights. @Livius accomplished this for the old screen, so I adapted…
As I didn't found an enclosure that checked all the boxes, I've designed it myself. It's a an enclosure with a print in place hinge and embedded magnets. Has the space for the soldered wires that are going to stick through the back. The…
This model is a remix of Loogle's Gaggia Classic / Pro touchscreen enclosure. That model is a remix of a project from LikeableBump. Consider visiting these projects and liking them!…
Overview Enclosure for a 4pin magnetic pogo connector for Gaggia Classic and Gaggia Classic Pro. One pogo pin connector is for Nextion Display. Second is for programming STLink. Designed for #6-32 x 1in screw but can be adapted for…
[UPDATE 01/11/2026] Added Gen 3.5 (P4) screen housing parts and updated front and rear mounts. This project is aimed around increasing the suitability of Loogle's amazing designs for the Gaggiuino project for printing ASA/ASA (or…
Cable clips, for clean wiring of the Gaggiuino Mod. Suitable for 18AWG high-voltage cabling as well as 22AWG low-voltage cabling. Should be printed from heat-resistant material. At least PETG, better ABS.
Gaggia Classic Gaggiuino - Pro Scales Calibrate in Place
Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic control project using microcontrollers. (github.com) Discuss: Gaggiuino Builders | Facebook You can attach this to the inside of the machine using double-stick tape…
If you want a front mounted screen but don't like the aesthetics of the traditional front mount then this is the mount for you. Minimal NextMonday front top mount with adjustable view angle. Clips on your existing lid latch, must be…
Remix of this model made by Matias Rossi. It houses the Nextion 2.4" display on machines like the Rancilio Silvia. I made this to mount it on the bottom part of my Silvia V3. You can then route the cable on the underside. What has…
Manufacturing optimizations (differing from original icon/logo): Stylized steam is consistent width Text is rounded Update 2022-09-13: Changed the cut model slightly to attach the handle center
A small change to chrisbarratt's awesome angled screen mount to allow for a 2.8" discovery screen with a 5mm offset
This is a screen housing for the Gaggiuino 3.4" ESP32-P4 screen. It's compatible with the Gen 3 ESP32-S3 screen mounts - Front, Rear, and Funnel (see https://www.printables.com/model/356026 ). Hardware needed (screen housing only): 4 M2 x…
This is a low profile driptray for use with Scott Rao's filter3 basket on Gaggiuino hardware scales. There are two versions: Atomique (New!) - the lowest of the low. If your glass can't clear this, take it up with physics. Regular - not…
This is a TFT file created by Steve Nofs of the Facebook group that has the main screen and some other screens converted to work with 3.5 Inch Nextion Discovery LCD. Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic…
A remix of JohnP's Poor Man Scale. Changes I made to the models: Made it compatible with another HX711 board Made the top slide over the bottom so that liquid wont go in as easy Added an optional model for a TPU cover so liquid dont drip…
Gaggia Classic housing extension to fit touchscreen of the Gaggiuino project on front of the machine. This top fits the screens baseplate of ‘ Gaggiuino - Gaggia Classic | Pro Touchscreen Housing and Funnel Plate Mount ’.…
This is an alternative housing and placement of the Nextion24 LCD screen used for Nextion based Gaggiuino. The housing has an an opening for the SD card slot at the bottom and attaches to the cup warmer plate by magnet. The two small…
I designed this part to tidy up my build a little. The PCB sits on the right leaving just enough space to mount the SSR next to it. If you can you should connect the JST headers before installing the SSR because everything is a little…
This mount will work with the screen housing designed by Loogle. Screen cables feed into the back of the mount and through one of the lamp fittings which needs to be removed (these are hidden by the mount so no longer needed. I have made…
This is for the Gaggiuino project. Instead of printing the screen mount and plate, I wanted to print an extension (or hat) that I could mount the display in that would also give me extra space for the wiring and components for the…
If you want to use the cheap VL53L0X breakout board with your Gaggiuino as a water level sensor, here is an enclosure for it. Parts needed 2 disc magnets, 5 mm dia. x 2 mm ht. (same as for Scales Mod)…
I modified the Gen 3 screen mount to use with a NextGen Gen 2 screen. You can now use any mount provided for the Gen 3 screen with a Gen 2 housing. In this model, I used the Back mount, but it can also be used with the Gen 3 funnel mount.
The cable protection for the thermocouple sensor is simply clipped on. It prevents any other cable or the housing from coming closer than 10mm to the thermocouple cable. This is a simple fix to avoid the usual NaN errors in temperature…
I made this housing for 2 "Aviation" Connectors to connect the Nextion and ST-Link. Mount with heat set m3 inserts and M3 Bolts with a washer.
This is a pivotable and adjustable top-front 4.3" screen mount for the Gaggiuino mod on a Gaggia Classic and Gaggia Classic Pro. This mount uses the Loogle “official” Gaggiuino screen housing…
The portion of the design that attaches to the machine is the same as the original from @legojoey17, but I created a new base for the drip tray to it on. The tapered design was chipping at the edges because it was so thin, so I created a…
These holders can be attached to the machine rather than attaching the SSR or enclosure directly. Originally designed for the Gaggia New Baby 2002 model, can be used in any other Gaggiuino project that uses the Lego housing…
Loogle's new Gaggiuino Gen 3 Screen Housing is flawless. I love the rear mount and the ability to hide the cables but since my machine is next to a wall I wanted to add the ability to rotate the screen. I've split the rear mount and added…
I made a cover with 8mm more height (this won't fit inside the machine so you may not want to use this cover - use the stock cover). The main box has more room for a dimmer and optocoupler from Amazon that are larger than the ones in the…
Just my 1rs stage of Gaggiuino scale. Parts need to be printed with 100% infill to avoid flexing. it uses: 4 M3x5 mm https://www.aliexpress.com/item/2251832760640149.html 750 g load cells…
-------------------------------------------------------------------------------------------------------------------------------- Update – 07/01/2026 Uploaded Rev 3 of BACK PANEL and OUTER SHELL Rev 3 increases the thickness of the screen…
Needed: - 3x Neodym 12x2mm round (below) - 3x Neodym 5x2mm round (front) Print as you would mount it on the gaggia.
I made this model to attach to the front of my Silvia. Take out the Rancilio sign on the front, and this should screw into the place of the two holes. You will need to make a small hold under though to route the cables.
I'm not affiliated with the Gaggiuino project. I just modeled this so I could design my own enclosure. Please note, I didn't model any bottom components. My box includes about 3.5 mm bottom clearance to allow for components on the bottom.…
Not to trash about the other designs, they didn't work for me, prints came out un-useble, even when sending it to be printed by a local business: this print, however, is very easy to print, saves on material, designed to be printed…
Printed in PETG, used supports only for the front clip. Print the font cover separately from the original design, not included here.
ToFnLED Housing for Gaggiuino included imbedded magnets, made with 2 parts fastened by M3 screw. I printed in ABS. you will need: *4 magnets D5mm x 2mm *1 countersunk screw m3 x 5/6mm
Case for headless mod of Gaggiuino which uses the 'hacked' FW from https://github.com/a4vgx7b2M/gaggiuino-esp32-loader . Will hold the ESP32-S3 devkit (e.g here ), JST XH 4pin male header ( here ), and SD car reader without voltage…
This shot mirror base utilizes the same bolt and ball mount from jkim_makes model but attaches to the side of the Gaggia Classic Pro or any magnetic housing with two 5x2 mm magnets. On the Gaggia Classic Pro, this mount will sit flush…
Gaggiuino PCB V3.1 enclosure with magnet base. In the Gaggia Classic it fits at the bottom, backside with the magnet orientated up (behind the fill funnel downtube) Magnet used: CMS Magnetics SKU: MCLF-270 Amazon B01EQK102G Other vendors…
This is a mount for the Nextion 2.8 screen on a Rancilio Silvia. It is designed to slot into a cutout in place of the front logo. The plate is designed to slot into a 76.30mm wide and 55.30mm high cutout. I recommend using hot glue to fix…
The connector in the vertical slot to the left is a 4P DuPont connector for BP (blue pill) programming and the right side is a 4S JST-XH connector (5Pins, right angle pins preferably) for the Nextion display. The wires coming from the…
Puck screen holder. Printed in PETG. Fits on top of your Gaggiuino tray. Did a new version. Slimmer design and a hole all the way the model so it easier to clean it.
A remix of the Lego Gaggiuino Component Housing with the power section moved to accommodate the shape of the Gaggia Tebe. This is designed to sit on the left of the machine, with the SSR underneath it (so the SSR is touching the metal…
Remix of great enclosure by @polygonfuture to allow a third connector for scales. 3rd connector is ‘pad angled’ from here and needs a small dab of CA glue as does not have the same lip as the others.…
Bill of Materials 3x Buttons - 19mm short momentary LED buttons 5v (needs ultra short clearance - low profile) - (1x red led power, 1x white led circle, 1x red led circle). https://www.aliexpress.com/item/1005001683893211.html 9x M3 6mm -…
Added the front and back panel pieces to contain a Nextion 3.5" screen. This is for the NX4832K035 specifically. The case is held together with 4x 16mm M3 countersunk screws, tapping into the plastic assuming the tolerances on your…
For those who have shown an interest, here is the external enclosure I made for my gaggiuino components. I wanted to keep the sensitive electronic components away from the heat generated by the boiler. It also gives ample space for…
Enclosure for 1-Bit AC 220V Optocoupler.
A tighter fitting housing for the Gaggiuino ToFnLED PCB. Part of my collection of Gaggia mods: https://github.com/seppestas/gaggia-mods Based on Loogle's ToFnLED Housing (Gaggiuino) . Adaptions / improvements Tighter tolerances, giving…
Slice in orcaslicer or bambu slicer. Print in petg or abs. 0.2mm layer height 4 bottom layers. If your printer doesn't have multicolor capabilities you can use orca slicer with the m600 gcode command to manually swap colors. The accent…
This is an entirely new model, but the idea comes from the design of Rawrer → chrisbarratt Gaggiuino front mount angled screen for OG Gaggia Classic, no drilling or soldering. Switch housing is raised from the surface to allow wiring,…
Support+ Tenz same at the gaggia scale.
Slight variation to the original and official display mount. The hinges were removed just like the trap door for refilling water. For water refill, you just grab the whole assembly and then put it back, personally I find that easier to…
This design makes use of the connector's edge to latch onto either the lower or upper part of the ventilation hole. Then the printed part will lock the connector in place. You are able to keep the wires completely inside the machine and…
Magnetic Cable Organizer for Gaggia Classic/Gaggiuino. Wires route along the top, then out of the notch on the upper front of the organizer Uses the magnet below: CMS Magnetics SKU: MCLF-270 Amazon B01EQK102G Other vendors part# 3DYC1
Housing for the dual scale PCB from DIY EFI or Peak Coffee, lid secured with 5mmx2mm Magnets same used for the scales
Gaggiuino logo that also acts as a LCD cover in conjunction with the v2 LCD housing. Can be printed with any filament type.
I designed this mount to be a drop in replacement for the standard power switch and light. If you want to use a Shelly and don't have issues with the switch positions after turning it on/off in the app I recommend using a momentary switch…
Display mount for the Gaggiuino Display on the front of the Rancilio Silvia Espresso Machine instead of the logo plate. Compared to the original model I shifted it a bit to the right and top so the steam knob can still be used easily and…
Модель для тех кто навесным монтажом может все)
This is a remix of the original Gaggiuino Gen 3 screen housing by Loogle. All credit for the base model goes to the original creator. I made this version because the original housing sits very close to the water area on the Gaggia…
Puck Screen Holder for Gaggiuino Gen 2
Just follow the original instructions.
This is a remix of @pnwgeek_2343632 very excellent gaggimate case model. I've used it for my gaggimate install. I like having the board on the back of the chassis vs buried inside because it's easier to work on and keeps the high temps…
This is a pivotable and adjustable top-front 4.3" screen mount for the Gaggiuino mod on a Gaggia Classic and Gaggia Classic Pro. This mount uses the Loogle “official” Gaggiuino screen housing…
This is a remix of the original Gaggiuino Gen 3 screen housing by Loogle. All credit for the base model goes to the original creator. I made this version because the original housing sits very close to the water area on the Gaggia…
Here is a range of cases to enclose a 2.4", 2.8" or 4.3" Nextion screen for the Gaggiuino project. The case mounts magnetically to the front of the Gaggia Classic using 2 (or 4 if you want to be really secure) 60x10x3mm Neodymium magnets.…
The portion of the design that attaches to the machine is the same as the original from @legojoey17, but I created a new base for the drip tray to it on. The tapered design was chipping at the edges because it was so thin, so I created a…
