Gaggiuino Rancilio Silvia PCBv3 + DualScales Board mount and splashguard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting solution to fit the electronics next to the 3WV while hopefully keeping them dry.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 73
- Makes
- 0
- Views
- 759
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this part to tidy up my build a little.
The PCB sits on the right leaving just enough space to mount the SSR next to it. If you can you should connect the JST headers before installing the SSR because everything is a little cramped.
I replaced the standard 3WV outlet with some of the same silicone tube that is used for the pump and the return line in hopes of reducing wear on the paint. If you want to use this in the current state you also need to do that.
Depending on the built up pressure and water level in the drip tray some water may splash out the side.