1 / 3
Gaggiuino Rancilio Silvia PCBv3 + DualScales Board mount and splashguard — zdjęcie 1
1 / 3

Gaggiuino Rancilio Silvia PCBv3 + DualScales Board mount and splashguard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounting solution to fit the electronics next to the 3WV while hopefully keeping them dry.

Ocena
0 / 5
Polubienia
5
Pobrania
73
Wydruki
0
Wyświetlenia
759
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this part to tidy up my build a little.

 

The PCB sits on the right leaving just enough space to mount the SSR next to it. If you can you should connect the JST headers before installing the SSR because everything is a little cramped.

I replaced the standard 3WV outlet with some of the same silicone tube that is used for the pump and the return line in hopes of reducing wear on the paint. If you want to use this in the current state you also need to do that. 
Depending on the built up pressure and water level in the drip tray some water may splash out the side.

Tagi