1 / 2
CyberDeck — zdjęcie 1
1 / 2

CyberDeck

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cybedeck based on the concept by Marciej Rebisz (https://www.artstation.com/artwork/18oQwX).

Ocena
0 / 5
Polubienia
9
Pobrania
33
Wydruki
0
Wyświetlenia
288
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

i always wanted to make a cyberdeck but never had the clear thought to design it. Now because of Atlantis(Hackclub!) which gave a new found motivation to build it!!

About the Project :-

A futuristic cyberdeck with a clamshell like housing. This project translates the concept art by Maciej Rebisz (ArtStation concept) into a functional, 3D-printable enclosure suitable for housing single-board computers (Raspberry Pi, Radxa, Orange Pi), portable displays, and custom keyboard and touchpad setups.

Total Parts:-
- Upper Body (to house the screen and connect to the bottom body hinges.)
- Lower Body (for holding all the other components like keyboard,trackpad,motherboard etc.)
- Hinge rod (so that the hinges move smoothly
- Side snap-fit (opens and reveals the usb ports)
- Front snap-fit (to lock the cyberdeck shut when closed)

Assembly:-
(2 Main Parts and 3 Snap fits)
- Take the lower body and align it with the upper one.

1)

2)


- push a rod through the holes of the hinges

1)

2)


- Take the side Snap fit and push into the holes on the sides of the lower body

1)

2)


- (Take the front Snap fit for closing the cyberdeck and push into the holes on the sides) x2

1)


2)


Suggested Hardware:-
Hinge Fasteners: M3 or M4 metric machine screws (or steel rod pins) for the hinge mechanism.

Assembly Screws: M2.5 / M3 button head screws and brass heat-set threaded inserts for internal mounting brackets.

Happy CyberDecking!

Tagi