CyberDeck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cybedeck based on the concept by Marciej Rebisz (https://www.artstation.com/artwork/18oQwX).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 28
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Public Domain
i always wanted to make a cyberdeck but never had the clear thought to design it. Now because of Atlantis(Hackclub!) which gave a new found motivation to build it!!
About the Project :-
A futuristic cyberdeck with a clamshell like housing. This project translates the concept art by Maciej Rebisz (ArtStation concept) into a functional, 3D-printable enclosure suitable for housing single-board computers (Raspberry Pi, Radxa, Orange Pi), portable displays, and custom keyboard and touchpad setups.
Total Parts:-
- Upper Body (to house the screen and connect to the bottom body hinges.)
- Lower Body (for holding all the other components like keyboard,trackpad,motherboard etc.)
- Hinge rod (so that the hinges move smoothly
- Side snap-fit (opens and reveals the usb ports)
- Front snap-fit (to lock the cyberdeck shut when closed)
Assembly:-
(2 Main Parts and 3 Snap fits)
- Take the lower body and align it with the upper one.
1)

2)

- push a rod through the holes of the hinges
1)

2)

- Take the side Snap fit and push into the holes on the sides of the lower body
1)

2)

- (Take the front Snap fit for closing the cyberdeck and push into the holes on the sides) x2
1)

2)

Suggested Hardware:-
Hinge Fasteners: M3 or M4 metric machine screws (or steel rod pins) for the hinge mechanism.
Assembly Screws: M2.5 / M3 button head screws and brass heat-set threaded inserts for internal mounting brackets.
Happy CyberDecking!
