13" MacBook Pro M2 Wall Mount (2022 Model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of bastiklein's model to fit my dad's 13" M2 MacBook Pro (or what we think is a Pro according to settings)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of bastiklein's model to fit my dad's 13" M2 MacBook Pro (or what we think is a Pro according to settings) that I've modified to fit the Pro version and to mount cleaner against a surface using adhesives as the surface this version needs to mount to can't be screwed into.
I've included versions for several thicknesses of adhesives as well as STEP files for further remix and a thin model that matches the internal cutouts to be used as a test fit.
I recommend printing this with 3 or more walls if using PLA as a precaution with heat and I've included models with a lightened footprint to reduce the material on at the base that can warp if you use a higher temp filament (it reduced my warping a good amount with ABS-GF)
It should be printed as one piece and can fit on beds down to 250mm X 250mm (P1/X1/P2/X2/CC/CC2/Core One L/L+)
Currently this is missing a picture of the mount in real life but that should soon be added once my dad mounts it.