Bumble Bee Cage - A mild torture test object
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Out of boredom, I made this little test object. It will challenge your printer's bridging ability as well as its…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Out of boredom, I made this little test object. It will challenge your printer's bridging ability as well as its ability to print unsupported structures. It measures 40mm across. The one pictured is right off the printbed and has very little stringing and the bridging and overhangs are not too shabby :) The square cross-sections are a bit muddled, though. See if you can do better!
Print Settings
Printer:
Tronxy X1 (My Baby!)
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
Print without supports, that is the whole idea behind this thing-a-ma-bob. Make it bigger if you dare!
After removing from the build plate, admire it, hang it from your work-light, or toss it in the back of a drawer. Have a nice cup of tea and relax with a good book :)
Category: 3D Printing Tests