1 / 2
Fractal Design Pop Optical Drive 5.25" faceplate for front-facing USB ports — zdjęcie 1
1 / 2

Fractal Design Pop Optical Drive 5.25" faceplate for front-facing USB ports

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add front-facing USB ports to the Fractal Design Pop series

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The USB A ports have 28.5mm on-center mounting screw spacing. The USB-C port has 16.5mm or 20mm on-center spacing depending on the .STL chosen. The mounting holes are chamfered so you can use M3 or 6-32 flat head screws for a flush mount.

Print in PETG at 0.2mm layer height without supports. There are two built-in supports for the locator tabs that need to be snapped or cut with a knife to allow the tabs to flex.

Tagi