1 / 2
Fractal Design Pop Optical Drive 5.25" faceplate for front-facing USB ports — image 1
1 / 2

Fractal Design Pop Optical Drive 5.25" faceplate for front-facing USB ports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Add front-facing USB ports to the Fractal Design Pop series

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
55
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

The USB A ports have 28.5mm on-center mounting screw spacing. The USB-C port has 16.5mm or 20mm on-center spacing depending on the .STL chosen. The mounting holes are chamfered so you can use M3 or 6-32 flat head screws for a flush mount.

Print in PETG at 0.2mm layer height without supports. There are two built-in supports for the locator tabs that need to be snapped or cut with a knife to allow the tabs to flex.

Tags