Bee House Framework 12 Motherboard Case with Swapable Fronts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular desktop case for Framework 12 mainboard and battery. Features slide-in decorative front panels and desk stands.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modular, functional desktop enclosure designed for the Framework Laptop 12 Mainboard and optional battery. Built with customization in mind: the internal technical cover keeps the electronics safe, while the front panel slots into sliding rails, allowing you to swap aesthetics on the fly, including the featured Bee House theme!
!!! CASE REQUIRES INSERTS AND BOLTS:
5x M2x8 Bolts and M2 threaded inserts for motherboard
6x M2x8 Bolts and M2 threaded inserts for battery
4x M2x8 Flathead (countersunk) Bolts and M2 threaded inserts for enclosure
2x M2x10 Bolts and threaded inserts for desk stands
2x M2x8 Bolts and threaded inserts for each expansion card port
Printing Notes:
I don't recommend using PLA for the "Case Base" due to heat creep / deformation. PETG or ABS/ASA is advised.
For "Case Base", "Desk Stands", and "Expansion Card Port", I recommend using 3–4 perimeters and at least 20% infill (I use Gyroid).
Parts are designed to print without supports — just place them on their flat faces on the print bed.
The slide-in rail is designed with standard FDM clearances.
P.S I will be grateful for any suggestions how I can improve my models <3