1 / 3
Bee House Framework 12 Motherboard Case with Swapable Fronts — image 1
1 / 3

Bee House Framework 12 Motherboard Case with Swapable Fronts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modular desktop case for Framework 12 mainboard and battery. Features slide-in decorative front panels and desk stands.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
39
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

A modular, functional desktop enclosure designed for the Framework Laptop 12 Mainboard and optional battery. Built with customization in mind: the internal technical cover keeps the electronics safe, while the front panel slots into sliding rails, allowing you to swap aesthetics on the fly, including the featured Bee House theme!

!!! CASE REQUIRES INSERTS AND BOLTS:

  • 5x M2x8 Bolts and M2 threaded inserts for motherboard

  • 6x M2x8 Bolts and M2 threaded inserts for battery

  • 4x M2x8 Flathead (countersunk) Bolts and M2 threaded inserts for enclosure

  • 2x M2x10 Bolts and threaded inserts for desk stands

  • 2x M2x8 Bolts and threaded inserts for each expansion card port

Printing Notes:

  • I don't recommend using PLA for the "Case Base" due to heat creep / deformation. PETG or ABS/ASA is advised.

  • For "Case Base", "Desk Stands", and "Expansion Card Port", I recommend using 3–4 perimeters and at least 20% infill (I use Gyroid).

  • Parts are designed to print without supports — just place them on their flat faces on the print bed.

  • The slide-in rail is designed with standard FDM clearances.

P.S I will be grateful for any suggestions how I can improve my models <3

Tags