Rugged Arduino UNO Case (with USBC Adapter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Arduino UNO case that contains a Small Solderless Breadboard and a USB-B to USB-C adapter.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An Arduino UNO case that contains a Small Solderless Breadboard and a USB-B to USB-C adapter.
It's great for students that need to have a breadboard and an UNO with them for various classes. the Type C adapter frees up some space in your bag by getting rid of the clunky A to B cables that the Uno's are still made with and provides the same functionality as the original cable.
This design does have some limitations though. I did not include a hole for the 5.5x2.5 barrel jack connector and the LEDs aren't the clearest
Assembly:
use hot glue to affix UNO to the Case Base - Shell
Use hot glue or other glue/epoxy of your choice to affix the USBC adapter to the UNO
Push the Case Base - Lid onto the Case Base - Shell once the glue/epoxy is set
cut the small Tabs off the breadboard, expose the adhesive on the back of the breadboard, push it into the Case Lid - Breadboard insert
Put the Case Lid - Breadboard insert into the Case lid -Shell
Screw the two shell half's together
Screw the Latches onto the Case lid -Shell
Screw the Case Base - Shell front areas
Hardware Needed:
6x M3x20 SHCS
Hot Glue
UGREEN USB-B to USB-C Adapter
Arduino UNO
Small breadboard (the size that still has side power rails)