Rugged Arduino UNO Case (with USBC Adapter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Arduino UNO case that contains a Small Solderless Breadboard and a USB-B to USB-C adapter.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 31
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An Arduino UNO case that contains a Small Solderless Breadboard and a USB-B to USB-C adapter.
It's great for students that need to have a breadboard and an UNO with them for various classes. the Type C adapter frees up some space in your bag by getting rid of the clunky A to B cables that the Uno's are still made with and provides the same functionality as the original cable.
This design does have some limitations though. I did not include a hole for the 5.5x2.5 barrel jack connector and the LEDs aren't the clearest
Assembly:
use hot glue to affix UNO to the Case Base - Shell
Use hot glue or other glue/epoxy of your choice to affix the USBC adapter to the UNO
Push the Case Base - Lid onto the Case Base - Shell once the glue/epoxy is set
cut the small Tabs off the breadboard, expose the adhesive on the back of the breadboard, push it into the Case Lid - Breadboard insert
Put the Case Lid - Breadboard insert into the Case lid -Shell
Screw the two shell half's together
Screw the Latches onto the Case lid -Shell
Screw the Case Base - Shell front areas
Hardware Needed:
6x M3x20 SHCS
Hot Glue
UGREEN USB-B to USB-C Adapter
Arduino UNO
Small breadboard (the size that still has side power rails)