Replacement latch for Nuova Rade NR44206 hatch handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this replacement after the original latch on my hatch broke. The part was independently modelled in Autodesk.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Replacement latch for the Nuova Rade / TECMAR Top Line & Classic access hatch handle, part NR44206.
I designed this replacement after the original latch on my hatch broke. The part was independently modelled in Autodesk Fusion 360 from the physical original, 3D printed and successfully tested.
This is an independent community-made replacement. It is not manufactured, supplied, endorsed or approved by Nuova Rade / TECMAR.
Printing
The supplied 3MF contains a Bambu Studio project with
The supplied project uses PLA. For a marine application, PETG or ASA may be worth considering for better heat/UV resistance, depending on the application.
Approximate dimensions: 56 × 31 × 28 mm.
Please compare the part with your original before printing and check fit before relying on it.
Licence
Creative Commons Attribution 4.0 International (CC BY 4.0)
You are free to use, modify and redistribute the model, including commercially, provided appropriate attribution is given.
Attribution: "Nuova Rade NR44206 replacement latch – independently modelled by the original designer."
Nuova Rade and TECMAR are referenced solely to identify compatibility with the original product. Their trademarks remain the property of their respective owners.