1 / 5
Statue/Figurine of a Lady — zdjęcie 1
1 / 5

Statue/Figurine of a Lady

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Female Statue

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution

This is a 3d Model of the 'Figurine of a Lady', a Greek Terracotta figurine from the 200s BCE. The original figurine is displayed at the Cleveland Museum of Art.

I have provided this model at two scales:

  • 100% scale, stands at about 23cm tall

  • 50% scale, stands at about 14cm tall

  • (You can also customize the scale in your slicer)

The bottom of the figurine has been leveled for easier printing and standing on a smooth surface.

Instructions and Info:

The figurine is hollow, which means reduced filament. However, you will need to use supports. In my bambu slicer, the figurine at 100% scale will require about 140g of filament and 5 and a half hours of printing time. The figurine at 50% scale will require about 27g of filament and a little less than 2 hours of printing time, it also seems to need less supports (This will vary depending on printer and slicer).

Happy printing, and make sure to upload your makes and give feedback.

Tagi