Statue/Figurine of a Lady
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution
This is a 3d Model of the 'Figurine of a Lady', a Greek Terracotta figurine from the 200s BCE. The original figurine is displayed at the Cleveland Museum of Art.
I have provided this model at two scales:
100% scale, stands at about 23cm tall
50% scale, stands at about 14cm tall
(You can also customize the scale in your slicer)
The bottom of the figurine has been leveled for easier printing and standing on a smooth surface.
Instructions and Info:
The figurine is hollow, which means reduced filament. However, you will need to use supports. In my bambu slicer, the figurine at 100% scale will require about 140g of filament and 5 and a half hours of printing time. The figurine at 50% scale will require about 27g of filament and a little less than 2 hours of printing time, it also seems to need less supports (This will vary depending on printer and slicer).
Happy printing, and make sure to upload your makes and give feedback.