Bicycle Bag Mount Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable adapter for a bicycle bag mounting setup.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A printable adapter for a bicycle bag mounting setup. It is intended to help adapt a bag, bracket, or mounting interface to a specific bicycle configuration.
Print guidance
Use PETG, ASA, ABS, or nylon rather than PLA for outdoor exposure.
Print with 4 perimeters and 35% or more infill.
Orient the part so layer lines are not the primary load path.
Installation and use
Confirm all mating hardware, clearances, and bag retention before use.
Install with appropriate hardware and check for interference with the wheel, brake, drivetrain, and rider.
Inspect the adapter regularly for cracks, fatigue, or loosening.
Do not use it for a safety-critical or high-load attachment.
Included files
STL, 3MF, and editable Fusion 360 source.
License and safety
This model is shared under CC BY-NC-SA 4.0. Commercial use requires permission from the creator. Print, install, and use at your own risk. Verify fit and suitability for your application before relying on a printed part.