1 / 1
Shadow Barricade, Spiked Defensive Wall | 32mm & 75mm Fantasy Terrain | FDM & Resin — zdjęcie 1

Shadow Barricade, Spiked Defensive Wall | 32mm & 75mm Fantasy Terrain | FDM & Resin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

When the armies of the Moonveil Dark Elves prepare for war, even temporary defenses are constructed to inspire fear.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

When the armies of the Moonveil Dark Elves prepare for war, even temporary defenses are constructed to inspire fear.

The Shadow Barricade is a brutal defensive wall assembled from towering timber stakes reinforced with dark metal, crescent-shaped blades, sharpened spikes, and the unmistakable banners of the Moonveil.

Unlike the elegant stone fortifications surrounding permanent Moonveil strongholds, these barricades are designed to be erected quickly along roads, battlefield approaches, military encampments, and recently conquered territory. Heavy bindings and metal braces hold the structure together while rows of sharpened stakes make a direct assault exceptionally dangerous.

Large Moonveil banners hang across the barricade, declaring ownership of the territory and warning approaching enemies that Dark Elf forces are waiting beyond.

On the tabletop, the Shadow Barricade can serve as a defensive wall, battlefield obstacle, fortified checkpoint, military encampment perimeter, siege defense, or objective that adventurers must destroy or overcome.

Multiple barricades can also be placed together to create larger defensive lines surrounding Moonveil camps, towers, gates, and other fortifications.

Perfect for resin or FDM printing, the Shadow Barricade is designed to complement the Moonveil Dark Elf collection at both 32mm tabletop scale and 75mm display scale.

Shadow Barricade — D&D 5e-Compatible Terrain Stats

Terrain Type: Defensive Wall / Battlefield Fortification
Faction: Moonveil Dark Elves
Armor Class: 15
Hit Points: 45
Damage Vulnerabilities: Fire
Damage Immunities: Poison, Psychic
Condition Immunities: Charmed, Frightened, Poisoned

Defensive Cover. A creature positioned directly behind the barricade may gain half cover or three-quarters cover depending on its position and size.

Spiked Defense. A creature attempting to climb directly over the barricade must succeed on a DC 13 Dexterity (Acrobatics) or Strength (Athletics) check. On a failure, the creature takes 1d6 piercing damage.

Fortified Position. The ground immediately around the barricade may be treated as difficult terrain when appropriate.

Break Through. The barricade can be attacked as an object. Once reduced to 0 hit points, that section of the defensive line is destroyed and may be crossed normally.

Burn the Barricade. Because much of the structure is constructed from timber, fire can provide attackers with an effective method of destroying the fortification.

⚙ Print Specs

  • Scales: 32mm tabletop and 75mm display

  • Type: Fantasy terrain / defensive wall / barricade

  • Faction: Moonveil Dark Elves

  • Use: D&D, RPG encounters, wargaming, siege battles, dioramas and displays

  • Recommended Resin Layer Height: 0.05–0.10mm

  • Recommended FDM Layer Height: 0.12–0.16mm

  • Materials: Resin, PLA/PLA+

  • Multiple copies can be combined to create extended defensive positions.

  • Scale can be adjusted in your slicer for custom battlefield layouts.

🧱 FDM Printing

For FDM printing, a 0.12–0.16mm layer height is recommended to preserve the wood texture, metal reinforcement, banners, and Moonveil ornamentation.

Tree/organic supports may be required around projecting blades, banner edges, crescent ornaments, and angled defensive spikes.

The broad base provides good stability, but a brim may be useful if printing individual narrow components separately.

🧪 Resin Printing

For maximum surface and ornamental detail, 0.05mm layers are recommended.

Tested ResinQuestMiniatures Saturn 4 Ultra 16K baseline:

  • Layer Height: 0.05mm

  • Bottom Layers: 5

  • Normal Exposure: 2.75s

  • Bottom Exposure: 37s

  • Transition Layers: 10

  • Rest Times: 2 / 2 / 4s

  • Anti-Aliasing: 8

  • Print-Time Compensation: 0.93s

  • PWM: 255 / 255

Adjust settings as necessary for your specific resin, printer, temperature, and printing environment.

Supports & Orientation

For resin, begin with Chitubox Auto Orientation + Auto Supports — Light, then manually inspect the banner tips, crescent blades, projecting spikes, braces, and other isolated details.

For FDM, orient the barricade to maximize build-plate contact while keeping support interfaces away from the highly visible banners and front-facing details.

Tagi