Liczymy pasujące modele…
This keycap was modeled from scratch using one of the keycaps from my MX Cherry Red based board. I converted the Rainbow 6 Siege Logo to an SVG, and using a series of extrusions, splits, and cuts, ended up with a custom key where the R6…
Mute talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Twitch talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Bandit talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Thatcher talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
This is a set of weapons and accessories designed for Studio Series 86 Grimlock, using mostly 5mm ports. The backpack is the only element that doesn't attatch via 5mm ports. It hooks on the pegs that allow Wheelie to hook on Grimlock's…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
With the castle last week, this release had to come! You now have a siege tower, a ram, plus siege ladders to effectively attack the castle you printed during the last week. Enjoy your siege games! I don't think I need to add much info to…
Model printed well for me, it's not fully dimensionally accurate but looks decent. I ended up painting the 'metal' part rather than printing from grey filament. Turned out decent.
This is a set of weapons and accessories designed for Studio Series 86 Grimlock, using mostly 5mm ports. The backpack is the only element that doesn't attatch via 5mm ports. It hooks on the pegs that allow Wheelie to hook on Grimlock's…
Sledge's hammer from siege. Would probably work best with a fine nozzle to get the hammer nubs to print better. I used a 0.4mm nozzle and it turned out decently. Download 2 of the head parts and one each for the shaft.
The original design customized with the logo of fab lab siegen. For those who want to customize their Original Prusa with the logo of their local Fab Lab Siegen.
This should be semi correct scale of Fuze's Gadget from Rainbow 6 Siege. You'll have to glue the side pieces to the body, side cylinders to the side pieces and battery or screws on each side piece. If you want to modify the model, feel…
Buck talisman from Rainbow 6 Siege, ready for dual extrusion! Created with Microsoft 3D Builder Print Settings Printer: CTC Bizer Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 25% Category: Keychains
Jackal talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Mira talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Montagne talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Thermite talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
Capitao talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…
A seal for a letter with In-Produkt logo. The seal was printed with SLA and a layer height from 0,1 mm. Ein Briefsiegel mit In-Produkt Logo. Das Siegel wurde mittels SLA Druck hergestellt mit einer Schichthöhe von 0,1 mm.
This model uses the following electronics: 1x OV2640 120 degree camera 1x XIAO-ESP32-S3 Sense 1x ESP32-S3 2x SimpleFOC Mini 2x AS5600 2x GBM-5010 T150 90Kv 2x MP1584 PSU 1x 4 Cell Lipo See pictures for wiring Diagram. If you have any…
This model was inspired by https://www.thingiverse.com/thing:1603188 Printer: Ender 5pro Rafts: No Supports: No Resolution: 0.3 mm Infill: 10 % Ironing: Top layer
This is a two-box insert for Earth Under Siege: Flashpoint, including the World Killer expansion. It's an amazing game reminiscent of X-Com, with a bunch of tokens, cards, and miniatures to keep track of, thus many of these trays can be…
Late Middle Ages - Generic Siege Artillery with crew for 1:72 wargaming Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Filament: Creality PLA Category: Games
This is my Trophy Winner Cup. Use bronce, silver or gold filament for a nice finish. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.2 mm Speed Material PETG / PLA Supporting Material only overhangs / organic…
First layer of the Cap version 2 needs to be transparent. On other you need to use transparent Filamet later. Just pause your Printer at the right time. I used WLED as a Controller. A mix of LED Strips for the sides and for the pistol,…
Hello, working on a project and thought I'd upload the file for these wheels I made for my OSKO Hound. It can probably be scaled down for the original, just adjust that in the slicer, but remember that this was made for the OSKO Hound, so…
This is a simplified version of the Siege workshop from age of empires 2. The building comes out well, though you will need supports for some of the overhangs Category: Video Games
I always desired the "Time To Kick Ass" charm from R6 and one day decided I could not live without it anymore: I designed it in blender, printed it and hung it to my AR15 because why not. Note: I just designed the tag, the boot itself is…
Designed for Siegen SG-3049C02 hair dryer, but possibly compatible with other brands and models of similar dimensions (see photos). Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 4 Pro Rafts: No Supports: Yes Resolution:…
Simple to print siege tower for your wargame needs. Print three staircases and use 1.75 mm filament for the drawbridge axle. Roll up! 60 mm wide inside to fit WRG 7th edition and any skirmish game on 25 mm bases. Print instructions…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
A Rainbow 6 Siege Logo Cookie Cutter Merry Christmas I guess
Wreak historical havoc with this working Roman catapult — a miniature Onager, named after the wild donkey for how violently it kicks when fired. Designed for real torsion-powered launches, this siege engine adds a touch of ancient chaos…
when I was making this I was watching Lord Of The Rings. Let me tell you orcs have all the siege towers.
R6-themed cap for the Corsair Titan AIO. I made a version with and without some fake bullet holes in the cap. I recommend printing in a translucent or iridescent filament to take advantage of the AIOs existing lights. I've had good…
Ein einfacher Siegelring und mein erster Versuch einen Ring zu designen, der auch noch zum erstellen eines Wachssiegels dient. My first try to design a ring, thats also acts to seal something with wax
This is based on the opus injection charm from Rainbow six siege
Our family loves the card game WIZARD EXTREME from Amigo. As the game markers or seals that come with the game are a bit sparse, I have found a remedy here. The new seals make playing cards even more fun! Unsere Familie liebt das…
3D printable topographic miniature of Siegen Capture the beauty of Siegen 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 50.875, 8.025 (LatLng) . It is scaled…
NOTE: REORIENT ALL SIEGE TOWER BODY PARTS TO BE “FRONT” DOWN TO PRINT WITHOUT SUPPORTS. (I originally did this on an older program I no longer use). Fits a total of 12 minis inside; there are three levels with four minis per level. My DnD…
I made that prop to see if I can make accurate prop with very limited time and technical resources. If you print in resin, use: blade right features and blade left features and then paint it in preferred colours. To make pattern pop i…
Charm version of Ela's operator icon from Rainbow Six Siege. Needed a lower resolution model to print at smaller sizes on my MPSM v2. v3 - test printed decent (see photo), though I'm not super confident in the keyring (rounded) v4 -…
The IQ Scanner from Rainbow Six Siege. Glue the single parts together and enjoy :D Thinks you need: -M4 Screw -M2 Screw -Superglue
Bandits Shockwire from Rainbow Six Siege Things you need: Clamp for a scooter battery Black Tape Super glue Red and blue wires
This is a Proxinity Alarm from Tom Clancy's Rainbow Six Siege. Since the file download of Thiniverse is bad, I included "R6PA_All_Files_ZIP.ZIP" to download all files at once. You're welcome. It was modelled in Fusion360. F3D files are…
This is the Signal Disruptor / Mute Jammer from Rainbow Six Siege. The model is Printed seperately and assembled after printing. Since Thingiverse only supports single file downloads due to increasing incompetence, I had to include…
so ima print more for r6 but heres a start
Notes: Printed with supports: Drone Body 1 Printed without supports: (everything else) Always print: Drone Body 1 Drone Body 2 Drone Shaft 1 Drone Shaft 2 Drone Tail For Regular wheels print: Wheel 1 Wheel 2 For TPU/Dual colour wheels…
The Siege Engine, with adjustable torsion springs. It is the real thing in the palm of your hands!
I printed the Hallway Seej set and while the idea is absolutely fantastic the model didn't fit for me at all. It had way to loose tolerances. Furthermore even with the largest stopper it shot way to low. To reach any distance, I had to…
Insert designed to make set up, storage, and gameplay easier Quantities are in the file name.
In case you've misplaced one of the many guns which make up WFC Siege Sixgun, specifically the main black blaster which he wields - here's a quick replacement! A simple one piece print which should also print nicely vertically on a FDM…
Overview In the context of a project at the MakerSpace of UniLaSalle Amiens, we designed, prototyped, and built a mini siege machine intended to take part in a game where the goal is to score as many points as possible by aiming at…
In this game, you play as a horde of goblins attempting to climb a city wall. Each player wants their clan to be the first inside the city. You will want to build off of your opponent's efforts while sabotaging their attempts to finish…
A revolver holder for 44 vendetta r6
With the castle last week, this release had to come! You now have a siege tower, a ram, plus siege ladders to effectively attack the castle you printed during the last week. Enjoy your siege games! I don't think I need to add much info to…
Habe zwei STLs eingestellt. Einmal das normale Logo und einmal mit dem Schriftzug "Pokalsieger 2018". Habe jede Ebene 3mm abgesetzt, falls man das ganze nach unten skalieren will oder muss - Außendurchmesser bei 100% ist 200mm. Somit kann…
Model printed well for me, it's not fully dimensionally accurate but looks decent. I ended up painting the 'metal' part rather than printing from grey filament. Turned out decent.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Not every grooming tool deserves an ordinary stand... Inspired by real medieval siege engines and the world of Kingdom Come: Deliverance II, this fully detailed catapult-style shaver holder transforms your OneBlade 360 into the…
I honestly have never played Rainbow 6 but my friends say it good so I made this logo for them. It comes with a stand. I would recommend setting the scale to 300 but I made it smaller for a key chains.
🏆 Zeige deinen Sieger-Moment! Diese einzigartige Doppel-Figur stellt zwei Gewinner dar, die gemeinsam einen Pokal in die Höhe strecken – perfekt für Sportfans, Deko oder als stylisches Geschenk. Die dynamische Pose vermittelt echtes…
Sledge's hammer from siege. Would probably work best with a fine nozzle to get the hammer nubs to print better. I used a 0.4mm nozzle and it turned out decently. Download 2 of the head parts and one each for the shaft.
This is a replacement part for the window hinge cover cap that originally comes from Siegena. I printed it with white PLA.
A token holder for the skill tokens in B-Sieged. Also a lid so you can keep them ready to play between games. Print Settings Printer: M3D Micro Rafts: No Supports: Doesn't Matter Resolution: 250 Micron Infill: Solid / doesn't matter.…
My skills modeling have improved so I decided to update my original fillings with more detail. I did print these on a poly jet printer so the detail may not come out as intended on ABS or PLA. These will fit Soundwave and Soundblaster.…
Just because Sideswipe get's his shoulder cannon, doesn't mean Red Alert shouldn't. The design was referenced from previous versions of Red Alert's shoulder cannons and there are two versions just so everyone can print it regardless of…
I shield I made to pair with Optimus' battle axe. I used black matte spray paint for the base and gold to fill in the Autobot symbol. Also I wanted to added battle damage to fit the theme of the Siege line but I forgot to buy silver paint…
A fill I created to hide the hollow part of Siege: WFC Soundwave's arms. I used some primer and paint to give it the grey colour so it could fit in with SW's arms. This will also fit Soundblaster's Arms Category: Toys & Games
Rainbow Six Siege Chip, same size as a 1€ coin to fit into shopping carts.
These are just simple AIO Covers to make them look Cooler. Look out ! If the Fans have Silikon Bumpers the Cover might not fit right
"alastor" siege cannon from game "REDCON" ,you can find soldier and "basilisk" cannon in my profile
My easy to print variation of the old game, Crossbows and Catapults. If you've never played the game before then the idea is to hide a flag behind a self built wall and then try to knock over your opponents flags using Crossbows and…
I found this model at MyMiniFactory and modified it for easier printing. I also added a stand and made a fuse out of wire and a key ring. For better details, use the variable height layer on the Impact Grenade button part as you can see…
Valletta Siege Bell and Fallen Solider monument scanned using Lidar and Photogrammetry
A Siege tank created from memory. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .12 Infill: 20% Post-Printing Sanding is optional How I Designed This Fusion 360 Category:…
This is a interpretation of the Starcraft 1 Siege tank from memory. Though there are some differences, I believe it is recognizable. Category: Vehicles
Remix from: https://www.thingiverse.com/thing:4600435 Same seige tank, but you can move the turret now. Supports required. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Infill: 20% Category: Vehicles
Remix of https://www.thingiverse.com/thing:4523772 by ysiegel. Changes to bottom: Increased the thickness of the base by 2.8mm and added indentations to hold four M4 nuts to match the VESA 75mmx75mm mounting pattern. Added a 1.6mm deep…
Attached is the main body. Top 10(?) layers were done in white petg, rest were in clear petg. Will add enclosure if there's interest.
I got sick of having tons of bags in this box so I made a rudimentary organizer that works with sleeved cards. Maybe someone can make a better one! You will need 2 of the following: SoR-Top3cards.stl SoR-Top3cards-lid.stl…
