1 / 5
Powered Quick Release Radar Mount (Uniden R8w) — zdjęcie 1
1 / 5

Powered Quick Release Radar Mount (Uniden R8w)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pogo-pin powered quick release radar detector mount, specifically for the Uniden R8w.

Ocena
0 / 5
Polubienia
3
Pobrania
24
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I saw a quick release mount similar to this one being sold for upwards of $75, and after reading various negative reviews on forums, decided it would be quicker and cheaper to draw one up myself. 

It's by no means a perfect design and I have included STEP files if you'd like to modify it further. The actual removal and installation sequence of the detector is quite smooth, and I have driven over 1000 miles with it so far without any intermittent power losses. I tested 10 or so tolerances until I settled on one that I thought was adequate.

The mount utilizes half the components from the existing Uniden single suction cup mount, and a few extra components (2 pin magnetic pogo pin connectors, 4 8x3mm magnets, VHB tape, a cut RJ11 cable). I personally sealed the pogo connector with some T-7000 glue. Mine is printed in transparent PETG to hopefully avoid melting in the hot sun.

Enjoy!

Tagi