Powered Quick Release Radar Mount (Uniden R8w)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pogo-pin powered quick release radar detector mount, specifically for the Uniden R8w.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I saw a quick release mount similar to this one being sold for upwards of $75, and after reading various negative reviews on forums, decided it would be quicker and cheaper to draw one up myself.
It's by no means a perfect design and I have included STEP files if you'd like to modify it further. The actual removal and installation sequence of the detector is quite smooth, and I have driven over 1000 miles with it so far without any intermittent power losses. I tested 10 or so tolerances until I settled on one that I thought was adequate.
The mount utilizes half the components from the existing Uniden single suction cup mount, and a few extra components (2 pin magnetic pogo pin connectors, 4 8x3mm magnets, VHB tape, a cut RJ11 cable). I personally sealed the pogo connector with some T-7000 glue. Mine is printed in transparent PETG to hopefully avoid melting in the hot sun.
Enjoy!
