Counting matching models…
For best result: Layer height:0.16 Enable support Top surface pattern: rectilinear, 5 layers Top surface pattern: rectilinear, 5 layers Sparse infill density: 50%
I designed this so my scanner could stand up on my desk without fear of it crashing about. I added some rubber feet to the bottom for great traction. It's tippy if you try pressing buttons but you can press one finger on the stand below…
This is a desktop stand for the Uniden UBC125XLT scanner. It will also support other similar size devices, for example my Retekess TR110 radio fits nicely.
I wanted a better option to mount my radar detector. The top of my dash or tackily on the window is not good enough. Mirror is best option. This is a 3 piece design that uses the original suction cup mount bracket from a Uniden R7. If you…
I designed this cup holder mount for my Chevy Bolt so I can listen to my Uniden BCD436HP scanner while driving. It cants the radio at an angle and the plug is a nice snug fit in the cup holder. The Bolt's cup holder is 81mm (3 3/16")…
**4/22/2023 - Update my mirror mount that I printed using PLA+ filament warped when in the sun. The temperatures outside were around 80 degrees Fahrenheit. So not too hot. I want to put out there that this mount may be usable with another…
This is a desk stand for the Uniden BCD436 Scanner. Print Settings Printer: Monoprice Select Mini V2 Rafts: Doesn't Matter **Supports:** No Infill: 20% Category: Gadgets
Fits GMR855-2/GMR855-2CK/GMR1048-2CK UNIDEN Walkie-Talkie Print instructions Print with flexible filament.
Description This is a custom remix of the original Tesla radar detector mount designed by mukul_k to make it compatible specifically with the glorious Uniden R7 radar detector . This mount securely holds the R7 using its 4 recessed screw…
This is a simple drop in 20mm ball mount for the Uniden SDS100 Scanner. I needed something to use with the 20mm Bulletpoint Mounting Solutions system. This mount can be left in the vehicle while the device itself can be pulled in and out…
I picked up a used Uniden BC125AT and the antenna was pulling it over so I made a desk stand for it.
Similar to my other stand, this one is for the UBCD396XT Uniden scanner. It is narrower in two dimensions and taller to better hold the scanner in place. Simply to print, give it 3 walls for sturdiness otherwise its a pretty easy print.
I captured this at The British Museum using ReCap360 and my iPhone 6S. The scan was cleaned up in MeshMixer before uploading. I've also included the raw scan data if you'd like to process it yourself. Marble portrait bust of an…
Pretty simple design, I wanted a scan that would hold my scanner upright on my desk so I could see the screen. Some other holders out there are designed to hold with a leather case but this is for no case only. Holds solidly and can press…
USO's exist... Unidentified Storage Object's (with an outer disk section that rotates) have started invading build plates all around the world! The images provided are proof USO's exist... This is fun and practical storage solution in the…
Model is in two parts. One part is a twist lock attachment to the bottom of the monitor. This is a separate part to ease printing and also to allow the bottom bracket to be changed. The bottom part slips onto the curved rail of the cot.…
Recommend ABS or another heat-resistant filament, as it's in a HOT car! Uses two M4 screws & heat press inserts to attach the metal mounting plate (just cut the tab off the suction cup mount for the R7 and drill holes). Uses two M4 screws…
Contains both a single and double holder with rooms for the clips. Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
I was struggling finding an appropriate spot near my couch for my portable scanner. I designed this up in fusion for the radio and other storage for a can. Could probably scale up 1% for a little more room as the fitment with the radio is…
Base basis for Uniden ubcd3600xlt
This Uniden radar detector mount was initially designed for the R7 but also fits other models. The hole that mounts to the mirror is 22.6mm. It uses (4) M4x0.7 - 20mm (or longer) bolts and (1) M5x0.8 - 8mm set screw. These can be bought…
I was annoyed with my walkie talkies just sitting loose on my desk so I made a holder which stores the four walkie talkies and their cables. There is also a hole next to each one so they can be charged while in the holder
Car holder for Uniden UBC125XLT scanner, or other similar radio. Mounted in the cup recess. Two versions of the base, with a diameter of 65 and 58mm and two versions of the arm: long and short. The arm can be adjusted at different angles.…
Here is a cookie cutter to create Dutch Christmas Cookies called kerstkransjes. And when they are done you can make the in a UFO :-P These cookies have a diameter of roughly 6 cm and the hole is 0.8 cm. The UFO part can be printed in vase…
Brodit adaptor plate for Uniden Bearcat UBC125XLT / Albrecht AE125H
This has been an idea I had been conceptualizing for a long time- having a blended or more-discreet radar installation that looks OEM-ish. I finally found a car that I wanted to put this on, so here is the model. In the original model…
This has been an idea I had been conceptualizing for a long time- having a blended or more-discreet radar installation that looks OEM-ish. I finally found a car that I wanted to put this on, so here is the model. In the original model…
Kilckfast connector for Uniden SDS100
The soft “rubber duck” antenna shells on my marine Uniden walkie talkies crapped the bed (too old, broke apart). This shell replaces them. I used Ninjaflex, but any TPU can do the job.
a polyhedron composed of cylinders modeled on the rhombicosidodecahedron recommendations: z-axis setting 60mm+ tree support comments: simple post print processing Category: Math Art
Use a strong filament so it won't melt I mounted this right under my dashcam from AliExpress
Ersatz Poti Knopf für Uniden UBC 9000XLT Kann ohne Stützen gedruckt werden.
a polytoroid derived from the rhombicosidodecahedron composed of cylinders representing lines Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polyhedron composed of cylinders inspired by a rhombicosidodecahedron Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polyhedron inspired by BM Stewart Category: Math Art
a polyhedron composed of cylinders based on the snub dodecahedron Category: Math Art
a polyhedron composed of cylinders based on the snub cube Category: Math Art
Made this because i needed one for myself and decided to post it.
This Gridfinity holder is designed to store a Uniden PRO501HH CB radio and two antennas. The bottom includes spaces for 6 mm × 2 mm magnets, which can be glued in place to make the holder magnetic and compatible with magnetic Gridfinity…
a polyhedron composed of cylinders based on the snub dodecahedron Category: Math Art
a polyhedron composed of cylinders based on the snub cube Category: Math Art
a polyhedron composed of cylinders modeled on the rhombicosidodecahedron recommendations: z-axis setting 60mm+ tree support comments: simple post print processing Category: Math Art
a polyhedron composed of cylinders inspired by a rhombicosidodecahedron Category: Math Art
a polytoroid derived from the rhombicosidodecahedron composed of cylinders representing lines Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
This is a Uniden SDS200 Base Scanner Stand.. I printed mine in PETG 0.2mm layer, 3 walls, 15% infill.
I created this model based on a Uniden PRO520XL CB Radio so I could design a 3D printed mount in CAD. It might help design an enclosure or some other project that incorporates this radio.
I prefer magnetic charge cables, but they have one key challenge: They get knocked off easily, even with the weight of the cable itself, so I went hunting for a solution. I found the bike holders as a starting point, added a cable holder,…
A remake to make the stand wider so it wouldn't slide to the side. It will print without supports. I used PLA and it takes about 4 hours to print.
Printed on K1 PLA but PETG may be better for outdoors No support 15% gyroid infill
that is a holder to keep you handy over the Copit console of your boat
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Uniden Bearcat UBCD436 HP/PT Desktop stand for leather case. Made this stand to use…
A replacement top cover for the Uniden Pro 510XL radio. The top on mine became very sticky and the adhesive was sticky, and couldn't be removed. Standard PLA should work, however you could do something else for more strength, but it isn't…
Desktop Stand for Uniden SR30C Handheld Scanner Print in standard upright orientation, no supports. I chose 30% infill to add some weight. Print Settings Printer: Sindoh 3DWOX Rafts: No Supports: No Resolution: 0.2 layer height Infill:…
Developed as a replacement for the Uniden suction mount where the suction had failed. This replacement has a simple flat surface to utilise double-sided tape for mounting. It makes use of the original GPS receiver arm and camera arm. I…
A pocket-sized UFO fidget spinner for stress relief and focus. Spin your stress away!
Requires 2 pieces of 3/4" x 5" (19mm x 125mm) Velcro one-wrap. Use a piece of 1.75mm filament as a rivet to retain the slider. The slider uses the belt clip button on the back of the radio to lock the radio in place. Print at 45 degrees…
