Counting matching models…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Scania R730 model RC wymaga klejenia i zaopatrzenia się w śruby m3 różnych długości. W razie problemów z włożeniem tapicerki do kabiny można z niej zrezygnować. Łożyska 6700 ZZ
- Toy style two-piece dual color version of Lockheed Martin's Blackbird SR-71 and F-35. - Easy to resize, easy to print (no supports) and to be used as giveaway, toy, or design object - ideal with the small optional stand for a table. -…
The 285mm long Scania tractor model features steering and freely rotating front wheels. The model was printed entirely in PLA, with a quality of 0.10 and 0.15, depending on the size of the part. To add a touch of realism, we printed the…
Extends the profile of the AOOSTAR R1 and R7 2-bay NAS PCs to add a 120mm fan. I split off the CPU fan header (with a standard PWM fan splitter) as the chassis header doesn't support PWM and outputs 12v continuously. Screws into the…
Case for the BetaFPV Air75 Tiny Whoop. The case has a modular design so it can be used for different battery numbers. The Case consists of the Case itself and a Lid to close it. Also a storage insert for four batteries (Lava 1S 450mAh)…
Portachiavi CR7 con esultanza estraibile. 3 pezzi facile da assemblare con l'aiuto di colla. Sedi dei perni da allargare con una punta min. Ø3 layer 0.15 - estrusore 0.4 - no BRIM - no RAFT
The Lockheed SR-71 Blackbird was a high-speed, high-altitude reconnaissance aircraft used by the U.S. Air Force to gather intelligence and photograph sites that were out of reach of spy satellites: Intelligence gathering : The Blackbird…
My cat, Ghost, has taken to perching on the tower (GPU water cooling exhaust on top) and when she wants to play or is watching out of my room she had a tendency to stand RIGHT ON THE BUTTON! So, taking inspiration from RangerYogi's cover…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
As this model is in 1:10 scale, it is rc controllable and not a quick print! This is my second 1:10 scale “Lanz-Bulldog” tractor. Many parts are quite similar to my 1:10 scale “Eilbulldog” but I have optimized most of them. The interior…
Update 2023-07-03: I'm updating this model slightly after testing it in the real-world for a while: Added higher rails to each side to better support the back-end Switched to PETG as the heat from my rack caused the PLA to sag over time.…
A modular case to easily carry the BetaFPV Meteor75 Pro O4, batteries, and a few spare parts. Prevents squishing the drone when transporting it. Even if the battery holders can work with the standard case, I'd recommend choosing a cut…
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Important: This is a remix of…
Screen to improve ventilation of the mini PC case. PETG. Layer 0.2. Infill doesn't matter.
This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router. It is a remix of TP-Link 1U rackmount housing for ER7206 router by calipsoii. I changed the backstop and strengthened the frame. Parts…
The AOOSTAR R1 and R7 are great budget NAS enclosures for backing up important files, but they have one significant airflow related issue, the stock top plate prevents smooth exhaust airflow out from the top of the unit and it stagnates…
Cristiano Ronaldo Portugal National Team.
I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…
Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props and more!Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props, the…
Updated drawer covers to show "MK3S+" Made Right Long Drawer with Solid bottom. Original Project by djedje_zr7
This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions…
I printed mine out of PLA, but I would recommend TPU. It mounts the camera at a 35-degree angle. It mounts on top of the U.FL socket to hold it down, as I found it would always come out with the stock design.
Pay with Love: The Magic Tap Wand 💖✨ Ever feel like paying for groceries should be a little more... magical? Whether you want to channel your inner wizard or just spread a little love at the checkout counter, this Tap to Pay Wand is here…
R7 Gyro Egg Fidget | Full Gyro Ring Edition | Easter Fidget Toy | R7Makers Meet the original. 🥚 Before the shell, there was the R7 Gyro Egg — a flat-profile, full-ring gyro fidget that looks like a candy Easter egg from above and comes…
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router side-by-side with a TP-Link OC200 Omada Cloud Controller. It includes a passthrough window for ease of cable routing from your WAN…
clips on to my 2023 xsr700, i've included the fusion360 file, so you can adapt it
Alternative Frame for the Meteor75 Pro with 45 mm Propellers The propeller guard is not mounted to the lower frame with screws as usual, but instead secured with rubber bands, as shown in the pictures. The LiPo battery is also held in…
Extension Grip for Canon EOS R7 Suitable bolt: Hex head UNC ¼" x ¾" Tested with 100% infill and “stiff” PLA
Original Bambulab hotend & CR touch z probe version. There is also BIQU Microprobe & E3D Revo CR remix versions now. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic…
Seems to have fixed my jello issue and is more supportive in a crash avoiding the weak betafpv canopy. Shaved some weight off since it is TPU. Used 2 m1.7x14mm screws. One on each side to mount. I use the spacers to provide some rigidity…
Print the original model Blackbird SR71 , scaling it to 135% and dowels to 142%. All credits go to occupied_brain for the great model of the Blackbird. This stand is a bit simplified and made margining the original 2 pieces. It prints in…
This is a custom bezel designed for thr R7 series Dell rack mount server. This has been cut to fit the length of a small bed such as the Ender 3 The retention system is still untested but shoud work well enough. Possibly a minor bit of…
A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…
“Gaspedal” thumb support to aid in recoil control! Now much more streamlined and uses more standard hardware. You can still have this printed in metal for a more robust feel, but since the threads are handled by the inserted nut you can…
This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…
Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…
this uses 2 screws to retain each module. it fits the standard 1u rack with little adjustment. i was able to print it on my ender 3. I used like 10 walls so that it was a solid part. it's printed in two parts to fit an ender 3. you will…
This is a remix of Schnabulation's remix of Ahmad Sundari's excellent hotend design, originally found here - https://grabcad.com/library/mbot3d-extruder-mk-2-mod-1 The above link has since expired, however you can find all the relevant…
No rafts No supports 15-20% infill
Edited J3ff's R710 stand to fit R720 side profile. With two of these, you can make the Dell R720 stand in a "tower" computer style, reducing the footprint needed for the server.
The AOOSTAR R1 and R7 are great budget NAS enclosures for backing up important files, but they have one significant airflow related issue, the stock top plate prevents smooth exhaust airflow out from the top of the unit and it stagnates…
This is a modified version of Austin Lively's p365 tlr7sub mounts to tight up the mounting and better suit my personal preferences. I settled on this length after trying out a few variances because it's the largest shelf that can be added…
This is meant for the router to sit sideways, hence the cutouts on both sides for the cable.
Remix of the frame to get the FC from meteor75 fit under the prop guard with more clearance because of some pins on the board. For the 1s 450mah battery holder, this one fits https://www.thingiverse.com/thing:3448125 Print Settings…
Poignée grip pour Canon EOS R7, rajoute 16mm a la hauteur idéal pour les grande mains, permet une meilleur prise en main du boitier. Pour sortir la batterie malheureusement faut le dévisser, mais comme on peut le charger via USB-C c'est…
Prusa i3 MK2.5S/MK3S X carriage with M3 heat set inserts based on original R7 stl. This model made for heat set inserts like in Voron Sourcing guides - M3x5x4 (https://aliexpress.ru/item/4000232858343.html or the same from another…
Roof for https://www.printables.com/model/202759-lanz-ackerluftbulldog-hr7 ! I haven't tested this design yet but I will test it the next week(s)! Consisting of 2 bars to support the roof (with matching mounts to glue to the cabin) and a…
1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…
Hi Mathew, I have an old friend in Ashburton with the same first and last name : ) You just reminded me of him going back 20 odd years now, wow. Any way I have had a little play with this model so hope it works out for you. As always…
made some modification to the original. I printed in ABS with 6 walls, 8 top and 6 bottom layers with 60% tri-hex infill
Bought this keyboard, but was unhappy with how low it was. I've designed new feet, which are twice as higher. If you go anything higher, then the rubber feet at the lower part are not touching the surface and keyboard slides. You need…
While this is built off of an original Prusa .stp file, credit goes here for the idea: Edit: Hmm.. It seems the honeycomb version is coming on the Mini+ now and it is injection molded? Oh well. To make it printable, I couldn't offset the…
a upscaled Sewer Party Tube i printed the net and the net_holder with tpu for all other parts i printed pla
Futaba R7008SB receiver Holder Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 35% Filament: Tesla Filament PLA RED Category: 3D Printing
This model adds a printable shirt or belt clip for the Fiio BTR7 that allows one to wear the little bluetooth DAC that could clipped to your shirt or belt like the BTR5's included case can. The leatherette case that comes with the BTR7 is…
75mm Tiny Whoop Hard Case Air75. This is a remix of spectrexFPV Whoop case to fit betafpv air75 and other similar drones
Cowboy hat for a little guy. For BetaFPV Meteor75 Pro Analog. Might work with Meteor65, cannot confirm.
**4/22/2023 - Update my mirror mount that I printed using PLA+ filament warped when in the sun. The temperatures outside were around 80 degrees Fahrenheit. So not too hot. I want to put out there that this mount may be usable with another…
Takes M4 nuts and 30~35mm socket head cap screws. This is my first make/remix/post/tinker, so as expected it isn't perfect. There was a slight issue on the bottom of the inside but it was very minor so I was able to use the case anyway.
Key for TLR7Sub for the FLEX-FCU Housing (X length)
Air75 case, uses an M6x45mm screw. Holds 12x Lava I 550mah or Lava II 580mah cells. Case includes a tongue to lock the whoop in place using the battery holster. Category: R/C Vehicles
Every great pendant needs a great chain. This one prints in place, needs no assembly, and looks like you spent way more effort than you did. 🔑 R7Makers Members get: Every new monthly release while active Instant welcome pack — 214+ files…
The model is designed to fit on the bike frame under the seat. Optionally add some padding to the AirTag, to prevent scratches. Tip! Can work together with my Super73 ANWB GPS Tracker Mount .
This does require supports.
printing : Profil: 0.20mm QUALITY or SPEED filament: PETG infill: honeycomb at 50% outside culture: 4 on a prusa mini or MK3/S/+ what is better about it? 1. screw holes 8 instead of 4, like the MK3 /S/+ prevents the Y bed from bending…
Horizontal stand for Unifi UDR7 / UDR / UDM UDR7 in the photos Printed with PLA using Ender 3 V3 KE, recommend to add more wall loops to improve strength Can be printed without supports as long as the bottom of the arches use a smaller…
Soporte para poner el filamento en la parte superior y que encaja perfectamente en el raiser de sector7 studios.
Bleed funnel for newer Shimano brake leveler for use without adapter. Use the original washer. Should fit all M4 brake leveler: Dura Ace ST-R9120 / ST-R9170 Di2 Ultegra ST-R8020 / ST-R8070 Di2 105 ST-R7020 / ST-R7025 Category: Sport &…
This is a simple 2.5" SSD sled for a Dell R720 server. I found a couple of models for other Dell servers, but none of them would work in my hot swap bays. This is a minimum working example, so feel free to remix/improve it. Printed on an…
This is a simple desktop stand designed specifically for the Motorola MOTOTRBO R7 and DP4800 handheld ham radio. (It might fit more radios from this product line.) The stand holds the device at a 12° backward tilt to improve visibility of…
“Made for the Tiny Whoop Pinch Camera, and Diamond Style Flight Controllers. You will have to cut 75% of the front post on the BetaFpv Air75 Frame and shave a little plastic off of the bottom of the frame under the front post.” Copied…
This is just a basic representation of the SR71. I made this model to test the input shaping on the MK4. I have included my Stl and also the 3mf that I used with the model split for printing with dowels. The tolerances on the dowels are…
This is an adapter for the Streamlight TLR7 flashlight, allowing it to be mounted to various devices with proprietary rails. Originally done by T.Rex Arms.
A bust of Cristiano Ronaldo -using last references years of his carrer.
I printed it in hard tpu the mount can be printed standing supports enabled
Streamlight TLR-7 HL-X Sub Lens Cover This lens cover is a great accessory for protecting your light while at the range. It helps shield the lens from gunpowder residue, keeping it clean and clear for optimal performance. Printed with…
necesita soportes, puede ser impreso con filamento PLA, ABS, PETG, etc.
Didn't like the round cheap metal housing for my headlight that I bought so I decided to make my own design. The housing is made from three printed parts sandwiching the LED light and lens together. You will also need some kind of fork…
The Urvolax UR73C carplay screen comes with a mount that you can glue to your dashboard. As it was bought to replace the stock Maps&More screen in a Skoda Citigo, I wanted to bolt it to the same place where the original screen was mounted…
Futaba R7014SB mount plate with 4 M3 bolts and a scotch to keep the receiver in place V2 has better scotch channel Use supports from build plate If you found this useful, please donate what you think it is worth to my paypal.me. Help…
I've included 3mf and stl. I've included a Fusion 360 export, should you need to edit the model. A year or so ago, I was having problems with my QNAP TS-563. I needed to get things back up and running so when my troubleshooting was…
Magnet based on the SR-71 Blackbird. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.
Description This is a custom remix of the original Tesla radar detector mount designed by mukul_k to make it compatible specifically with the glorious Uniden R7 radar detector . This mount securely holds the R7 using its 4 recessed screw…
It is a Blackbird SR-71, it used to be the fastest jet in the world. But people stopped making them because it was too expensive. I made a version 2 (7/11/24)
This is a desk stand for the Motorola XPR7550 and XPR7550E radios. Print Settings Printer: Monoprice Select Mini V2 Rafts: Yes **Supports:** Doesn't Matter Infill: 20% Category: Electronics
Dell PowerEdge R720 3.5'' Disk Tray with 2.5'' Disk Adapter This model is designed to accommodate 3.5'' disk bays in Dell R720 servers. The model also has 3.5'' to 2.5'' disk converter adapter. So, yo can use any 3.5'' or 2.5'' disk with…
I bought some prop remover that I thought matched the one the original tool was designed for (based on the images from the Amazon seller), however when I received the product it was not. It was more angled which caused the sim tool to not…
I purchased some 775 motors with a 19 tooth pinion gear from online with the objective to mount it to my kids' PowerWheels. Didn't get around to it until recently. The 19T pinion doesn't line up with the stock gears and as such it needs…
Gyro Heart Fidget | Mechanical "Print-in-Place" Design | R7Makers Experience engineering in the palm of your hand. This Gyro Heart isn’t just a decoration—it’s a precision-engineered "Print-in-Place" mechanical fidget that spins on…
This is a simple stand to use the Zyxel NR7302 indoors. It might also be compatible with the NR7301 and NR7303, but this is untested. To mount the Zyxel NR7302 to the stand you need 4 M4x15-20 screws.
I didn't like the look of the skinny chrome forks. Yamaha designed a simple cover for the newer models which requires taking the forks out of the tripleclamp, something I didn't want to do. So I desinged them in two separate pieces to…
I got a request to do honeycomb frame for MK3 R7. I made 2 models. One for multicolor and one with 0,1mm clearance for the text for more easy to put together. Maybe not easy but better anyway 😁. Made a matching cover as well. Hope you…
Dell PowerEdge R610 R710 SFF 2.5 Inch HDD Tray
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 5% Filament brand: Add North Filament color: Light Grey and White Filament material: PLA Notes: I'd do at least 4 top layers so…
