TP-Link 1U rackmount housing for ER7206 and OC200
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1U rackmount adapter for TP-Link OC200 Omada Cloud Controller and TP-Link ER7206 VPN router.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 379
- Makes
- 1
- Views
- 3,805
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Description
This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router side-by-side with a TP-Link OC200 Omada Cloud Controller. It includes a passthrough window for ease of cable routing from your WAN connection.
(I'm starting to run out of room in my rack and decided to bring these two devices onto the same 1u shelf)
Parts Required
This adapter is split into two pieces so that it fits on a standard print bed. To join the two halves together, you will need:
- 2x M4 hex nuts
- 2x M4-12 (or M4-16) cap head screws
Print Instructions
NOTE: This model should be printed in PETG to prevent sagging due to hot components.
The assembly in the pictures was printed at the following settings:
- Printer: Prusa i3 MK3S
- Print Settings
- 0.4mm layer height
- 3 shells sides
- 5 shells top and bottom
- 15% infill
- Filament: Prusament PETG Jet Black
- Supports: none
- Brim: none
Assembly Instructions
- Print both halves of the assembly:
- If trying to match the powdercoat of your rack, print both halves with their faceplates pointing down into the bed.
- NOTE: printing in this orientation means your printer must bridge a 1" air gap and you may get some strings that need trimmed off.
- If you don't care about the appearance of the front plate, print them flat with faceplates standing vertical.
- If trying to match the powdercoat of your rack, print both halves with their faceplates pointing down into the bed.
- Print the 2 different backstops. The ER7206 backstop can be inserted two ways (whichever brings your router flush with the assembly).
- Use two M4-12 (or M4-16) bolts and nuts to join both halves of the assembly together.
- Mount empty assembly in your rack.
- NOTE: the ER7206 and OC200 slide in from the front but ARE NOT MECHANICALLY SECURED into the assembly. Add some double-sided tape on the shelf if you want to secure it in-place.
- Enjoy your sweet rack-mounted network appliances!