392 models
Batch 2 styled filament detector mount. It can freely rotate around the pivot and shift the filament line by 28.5mm. Parts have 1 layer sacrificial bridge layer to make it easy to print. For Batch 3 I modified the base. Enjoy it! Any…
This part replaces the spool holder on the Elegoo Neptune 3 Pro. The Neptune 3 Pro has a large spool holder that increases the height of the printer. I use a filament dryer on a bookshelf above my printer so the built-in spool holder is…
This is a printable 3D model of the echo detector from S.T.A.L.K.E.R.. The slots in the panel are the right size for 5mm slide switches. (These are the ones I used: Amazon Link ). Here's a link to the ESP33 development board I used:…
The Compact Muon Solenoid (CMS) detector is one of the big four experiments of the Large Hadron Collider (LHC) , the world’s largest and most powerful particle accelerator. The LHC is part of CERN 's accelerator complex in Geneva,…
This is an improved antenna, buttons and display for this Stalker Bear Detector . With these improvements you'll find artifacts in no time! Print instructions The antenna part has quite a lot of thin parts. With FFF 3D printers it may be…
For best result: Layer height:0.16 Enable support Top surface pattern: rectilinear, 5 layers Top surface pattern: rectilinear, 5 layers Sparse infill density: 50%
A Universal metal detector wall mount , hang detector either by coil or by arm cuff. There are several different logo designs to choose from. Print Settings Printer: Creality Ender 3 v.2 Rafts: No Supports: No Resolution: .2 Infill: 20%…
This vault is small enough to print with the Prusa Mini and has a 6 Lever Detector Lock with warding and curtain, setting a new standard for 3D printed locks. It's easy to open with the key, but picking this open is extremely difficult.…
I said come in! Don’t stand there! I got annoyed by the lack of any good and free models of the Echo (at the time I started this project), so I decided to make my own. This is about as close as I could get to the in-game model while still…
I accidentally uploaded a wrong STL for the button. Its now updated! I purchased a 18650 capacity tester from AliExpres
Hello ! I created simple but reliable cable clip clamp for cable of coil to metal detectors. Dimensions are 6 mm cable and 20 mm shaft. Usable for upper (aluminium) shafts of all metal detectors with that dimensions. I use that cable clip…
Металлоискатель Коллекция: | Вертов: 35,026 | Лица: 34 721 | Трис: 69,721 | Объектов: 15 Ready for comments) I am ready to study with you)
PLA Azure film Layer height 0.12 Line width: 0.4 infill: 40%
I made a mount for the Minelab Vanquish 440 metal detector and the Minelab PRO-FIND 15 pinpointer (25, 35).
Fake smoke detected for use in hiding something installed on your ceiling that you would rather not explain to people if they see it. The base plate attaches to the ceiling. The detector attaches to the base plate with a slight turn to…
7/21/21 - This is a little mount I created for my radar detector to sit right above the center screen of my Model Y. Not sure how well it will stay put in the vehicle as I have just printed it. I am not responsible if this causes any…
This is a functioning model of an 1824 Chubb detector lock. Watch the video to learn more! Required Parts: (1) 25mm x 5mm metal dowel (Glue into frame - the key rotates on this dowel) (2) 30mm x 5mm metal dowel (The detector and levers…
I wanted a better option to mount my radar detector. The top of my dash or tackily on the window is not good enough. Mirror is best option. This is a 3 piece design that uses the original suction cup mount bracket from a Uniden R7. If you…
Clamp on / Quick Release Metal Detector Stand that fits the NOKTA MAKRO SIMPLEX+. No screws needed ! See pictures for proper attachment location. Infill can be what you like however I haven't tested the stand for strength below 50% while…
FR : Cet accessoire a été conçu pour vous avertir chaque fois que votre boîte aux lettres est ouverte, vous permettant de savoir exactement quand votre courrier arrive (lettre ou colis). Plus besoin de vérifier constamment si le facteur…
This device sends a text message to your phone by emailing your phone number. Program just needs wifi and an email account, instructions are in the Arduino code. Built for the inexpensive wood Victor Rat traps Hot glue the detector to…
This model is compatible with the lego system.
Couldn't find the right size sieve for metal detecting duties so drew one myself. Printed in 4mm thickness but I feel that 3mm would have been sufficient. Model is quite large, could be scaled 80-90% and still fit an adult hand comfortably.
An adjustable quick-release mount for the Valentine One Gen 2 radar detector. Uses magnets to handle the quick release aspect: you have to rotate it out to get it out. Inspired by the DS1 mount (https://www.rdforum.org/threads/113691/),…
Description I created this because I have butter fingers and hate the whole process of punching holes and installing anchors into the ceiling to install the original provided X-Sense mounting plate. I did not want to do this process for…
I needed a spare one to fit the simplex so i printed at 2 and 100% infill PLA but will be printing in PETG, the PLA one is plenty strong tho so test it out first. Added another nut n bolt they been tidied up v2, these printed and fitted…
I was inspired to create this by https://www.thingiverse.com/thing:2248307 because the positioning seemed ideal, but I wasn't able to get it to stay in place without using a sticky pad that looked ugly from the outside. I recreated the…
The IR sensor connector mounted on the MK3S printer extruder associated with the MMU2S is vulnerable and may be moved or broken. This new cover protects it better. Print instructions As the others pieces of the printer, use black PETG…
This model is compatible with the lego system.
I designed this for my F10 M5 and Escort Max360c radar detector, but I'm sure it will work on other makes and models along with most current Escort detectors. This allows you to tuck the detector up close to the roof right between the…
Here is my version of the well known box, modified to fit a Bosean FS-5000 radiation detector. Material used: M3x8 countersunk 8x. M3x35 hex, or 3mm rod 6x. EVA foam, thickness 2, 5, 10mm. Templates for cutting are included in files.…
This is a DIY Project for a Metal Detector. The diameter of the coils are 254mm (10") and 127mm (5"). When the coil is inserted you can use silicone to fix it and create protection against environmental effects (water,..). There is a hole…
This is a functioning 6 Lever Detector Lock with warding and a curtain. It is based on a design from the 1850's, although it is not a replica of a specific lock. In the video, I used the following: Filament: BambuLab PETG HF: Gray…
This model is to keep your Creality filament detector when upgrading to a direct drive extruder (I upgraded to Sprite Pro and had a need for it). Mounts next to the top spool holder on the aluminum extrusion with standard T-slot nuts.…
This is a collection of parts for a homemade metal detector. The model is completely parametrized in Fusion360. If you want to make changes to the design to fit your needs, you can do that.
This vault has the most advanced lock from the first half of the 19th century: The 1824 Chubb Detector Lock. Watch the entire video before you begin, and follow the assembly order as shown in the video (and like, comment and subscribe to…
This is a small stand for a ZG-204Z/ZG-204ZL Zigbee PIR motion detector ( like these ) with a ball joint so you can position it just right.
The original guide wire frame for my LK5 Pro wouldn't fit in combination with the filament detector bracket so I tried to modify it. This is my first CAD project and I used Tinkercad for it. My first version (black in photos) guide wire…
This is a first draft of a prop metal detector. The text will not show up in your print unless you split the stl into parts and select a second extruder. The electronics consist of 6 red LEDs, 2 10 ohm resisters, 1 lipo battery, 1 lipo…
I printed it in Prusa PETG. Depending on your printer scale it or use the .blend to change the modell.
This is in fact a remix of https://www.thingiverse.com/thing:3850237 but Thingiverse doesn't support adding a thing as the ressource any more, at least for me. The parent did a wonderful job but I never really figured out how to screw the…
This fits with the model ZCOMBO First Alert Smoke/Carbon Monoxide detector. I lost a mount somehow so I modeled this one up. Print instructions I used 0.3mm layers with PETG on a Prusa in "draft" mode. Higher resolution settings would…
Description This is a custom remix of the original Tesla radar detector mount designed by mukul_k to make it compatible specifically with the glorious Uniden R7 radar detector . This mount securely holds the R7 using its 4 recessed screw…
Disassemble the original material break detector, use the removed screws x 4, and install the fixed lifting bracket. Use M3x18 x4 (M8x16 can also be used) to lock the broken material detector. The left handle is inlaid with a spool…
3D printed coil and case for the (slightly modified) Clone_Pi_W metal detector. Design from : http://meandr.org/archives/3900 , originally from Andrey F. (fandy.front.ru). Added a potenciometer for volume control, and the 12V battery is…
This is an adjustable coil for a mediumwave DIY detector-radio. For most of the most popular stations in Europe you'll need about 30 turns which gives an impedance of 50 - 180 uH. Frequency range is about between 550kHz and 1100kHz. If…
This is a modified cover for the filament detector of the Elegoo Neptune 3 (Pro), specifically designed for use with PTFE tubing. There are four versions: Version 1 - is completely original, without any modifications. Version 2 - has…
Bat Detector Case This is a custom compact case for the Bat Detector Kit by Franzis, which makes the ultrasonic sounds that bats make audible so you can spot them in the wild. You can get the kit here:…
I wanted to design & print a cat litter scoop since I first got an 3D printer some years ago. Then 1 1/2 years later, I finally did it! Have fun and greet your cats from me! P.S.: This is of course not very practical because you easily…
This is an extension to part 2 of the Elegoo Centauri Carbon Detector so that the detector will be centered over a Creality Space Pi sitting next to the Centauri Carbon. This is only part 2, you will still need the other parts from the…
The result of this project is a 3D printed, arduino nano driven EMF detector. Yes, you could go for hunting ghosts, or you could try to find sources of electro magnetic fields creating noise in your speakers, or killing the functionality…
A radar detector mount for a Valentine radar detector in a Tesla Model S. The bracket is designed to tuck the detector unobtrusively high on the windshield to the right of the rear view mirror. I did have to mount it lower from the roof…
Prevent tipping with this sturdy stand. It has a 2 part clamp mechanism using a hose clamp which holds more evenly than screw-type designs. (Easier too!) You need to buy a 1.5" hose clamp to install (2" should work too)! You can purchase…
Created by Davide Primc for the CMS experiment at CERN. The CMS detector at CERN is one of two multi-purpose detectors on the LHC (Large Hadron Collider). CMS acts as a giant, high-speed camera, taking 3D “photographs” of particle…
Small housing for an Arduino Nano and a PIR-Sensor / Motion Detector to control a LED-strip automatically cover for ceiling mount with screws or cable ties, connect cover and housing with two M4x10 and hex nuts Designed for a Ardunino…
a mount for the Flamingo of Smartwares smoke detector. There are two version a low profile mount when adhesive tape is used for mounting or a high profile mount when you want to screw it to the ceiling or an electrical box Print Settings…
Smoke detector enclosure without battery without sound, just electric signal from chip directly with cable inlet without accessible pushbutton custom color and size Designed around pcb from smoke detector with model nr "Brennenstuhl…
Pickup connection between the handle shaft and the search coil. Fits on Jago Metal Detector MTSG01 Coil height: 18mm Coil inner circle diameter: 89mm Print Infill Density: 100% Not included: Bolt and nut M10x45 - DIN 933
This is casing for MDS-60 metal detector kit. All is printed using PLA except Part 5 and Part 6 which I printed using PET-G Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: 200 Infill: 38 Filament:…
Prusa MK2 MK3 Watch Dog Smoke Detector Fire Saftey Device R3 detects small smoke and cuts down power to prevent fire, sends you push notification over WIFI / internet . ATTENTION: HIGH VOLTAGE, DANGER 220V ! Make only if you are confident…
UPDATE: There is an updated version as of October 2025, it can be found here . This is a wall or ceiling mount bracket for the 360 degree rotating sensor base that comes with some versions of the Xiaomi Human body sensor. (It's marketed…
The holder is designed to make it easy to move the smoke detector around your home or office as needed. This can be useful if you want to temporarily relocate the detector to a different room or if you need to make changes to your…
Old school detector radio technology meets 21st century 3d-printing. This is a simple to build and use detector radio for the mediumwave band. And yes - it runs without batteries (by only using the transmitted radio energy). We developed…
After upgrading with the internal spool mods & filament moving inside I looked for ways to cover the holes left on the panel, but couldn't find many options that could cover both 2 holes & screw hole. So I sized up the closest to reach…
Replaces the plastic screw of the Meterk Metal Detector. Propably works for a lot of other cheaper detectors aswell (uses 10mm diameter screw). In addition, i recomment printing out new spacers so the screw doesnt get bent wich is the…
Use M4 screws with M4 knob for the detector, The detector is now align with the extruder so i tighten the screw Use an M4 threaded insert for the upper parts
Clogging detector wheel for Modix BIG-60 V4
For Christmas, I got a Bounty Hunter Metal Detector and Pin Pointer combo. Within 5 minutes of trying to get the pin pointer going with a 9V battery, the tab on the back of the pointer snapped and the battery casing wouldn't go back in. I…
Designed as frame for Coil construction to minimize Capacitance.
Do you love CERN's CMS Detector but want something a little easier to print? This model is for you! This simplified 3-part version can be printed in a bit more than 4 hours, and it's nearly as cool as the full model. The endcaps can be…
This is a mount for the Valentine One radar detector. It is angled to be level on my Acura TL. If your windshield is a different angle your detector wont be level which will reduce range. You need two short machine screws and matching…
Print a new belt buckle for your GRIP6 belt strap. Being plastic, it can travel with you and go through metal detectors. Printing the belt buckle with its iconic curve would require support and show horrible layer lines. Instead, I…
Many cities are frequently burglarized. Often, the burglars are not afraid to break a window. At my home has already been broken into twice, in my job I often have to deal with burglaries and have made the experience that burglars are…
Designed using SolidWorks
Honestly, the only feature of this printer that I've never liked is having the filament spool on the top and having to thread the filament through the lid. So, I searched for a solution on various 3D model sites without ever finding…
These are the enclosure and 3D printed parts for my CO2 detector project. If you would like to build your own CO2 detector, the full assembly instructions are on instructables here . The circuit python code for the CO2 detector can be…
We build a simple CO2 detector that measures the CO2 content of the air and gives signals as soon as certain values are exceeded. Assembly manual You can see the instruction how to build this on our wiki:…
This is a replacement mount for a smoke detector (Rauchmelder) made by e2 elektro GmbH in Austria.
KP3s Pro V2 Broken material detector bracket？Do you have any experts to improve it？
Although the original model by Haxxlinus over on thingiverse fitted my smoke detector perfectly, the spacing of the screw holes seemed to be slightly different on my original bracket. That's why I remixed the model in such a way, that it…
A vertical mount for a cheap tuya zigbee or wifi PIR (passive infrared)/mmWave motion presence sensor I found on AliExpress that is compatible with the IKEA SKADIS pegboard system. I printed it vertically with tree supports for the hooks.…
I believe Ludlums.com may sell a replacement, but it's faster to print my own =) This design has a tapered cone shape so that it grips the probe, but also comes off easily. I printed in PETG with 20% infill, 0.2mm layer height. The…
A mounting plate for your Kiddie Fire alarm! had a fire alarm laying around but somehow lost the mounting plate. I don't have an original so I have no idea how faithful it is, but the action is smooth and feels like any other smoke…
My car's electronics emits energy inside the cabin that is in the same band as laser radar detection. This blinder shields the forward laser sensor against the in-cabin emissions so you can still keep the laser band enabled. I strongly…
Remix of https://www.thingiverse.com/thing:2784852 for Aeotec Water Sensor 7
Spacer for use with Creality Ender 5 Pro filament run-out sensor and upgraded extruder with dual gears: e.g. www.aliexpress.com/item/33041468821.html Two versions provided, for either inset M3x5mm bolts or surface mount M3x8 mm bolts.…
The clip on my Escort 360 MAX suction cup mount broke, so I designed this replacement. Printed in ABS and worked well. Design (contour) is slightly different than original, as I was still learning to use Fusion 360, and did not spend the…
This is a remix from thing 2577717, modded for fitting bowden tubes on both ends, specially if fitting on top of the extruder. Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Project Description: Custom MQ135 Sensor Housing This is a precision-designed, 3D-printed enclosure for the MQ135 Air Quality Gas Sensor . The housing is engineered to securely hold the sensor module while allowing maximum airflow to the…
update- 3-4-2024: revised yaml to address turn off of led. This is a very fast responding radar motion detector with an adjustable hold time. parts list: d1mini esp32: aliexpress Note: an esp32 device like this is recommended for the…
CLIP FOR HOLD FILAMENT DETECTOR Модуль обнаружения разрыва филамента для 3D-принтера Ender 3 CR10E | AliExpress ATENTION, MODEL NEED REPAIR, PEASE REMIX Before print, maybe need rotate pin element for fracture toughness.
Created a 45 degree angle corner mount for a silvercrest / LIDL smart home zigbee motion detector.
The brackets of the cable routing got brittle so I decided to redesign and 3d print them. Now my retro garrett headphones are like nw. You can re-use the screws and nuts. More infos on my blog:…
https://github.com/ntchris/voron_mod_super_diy/tree/main/ercf_v2/filament_tension_sensor_hall Inspired by Annex-Engineering's Belay sensor module https://github.com/Annex-Engineering/Belay Inspired by jmillerfo 's Voron ERCF Filament…
White's 3900/D PRO PLUS Metal Detector Battery Holder Replacement USE AT YOUR OWN RISK My original battery compartment used D cell batteries (4 x 1.5v = 6v). In college I decided to go eco with all rechargeable in my life and taped 4x…
Hi friends, I don't know about you but for me, bowden extruder is a calamity. That’s why I changed the original FLSun SR extruder with a Bondtech direct drive as soon as possible. I used the protocol (and firmware) of Cyril Guislain (…
I have made a small fast print to show u the result on photo :)
a simple wall mounted hook with two hooks and inset screw holes. prints great on its back, needs supports that way but not much. havent tried it but i imagine printing on a raft you could print it upright without supports
I wanted more stable stand that will not glide on the desk. It uses 10mm stick-on rubber feet and is pressure-fit together. The back-plate replaces the original one and screws on with the original screws. The sensor model: Tuya ZY-M100-2W…
Recommend ABS or another heat-resistant filament, as it's in a HOT car! Uses two M4 screws & heat press inserts to attach the metal mounting plate (just cut the tab off the suction cup mount for the R7 and drill holes). Uses two M4 screws…
![[DEPRECATED] CLIP FOR HOLD FILAMENT DETECTOR ENDER 3 V3 SE / ENDER 3 V3 KE](https://media.printables.com/media/prints/1071581/images/8107442_7af22430-73e0-4091-9563-8e423546c73c_14312c93-14f8-4b85-8e37-8b17a9cc87fa/photo_2024-11-13_03-08-42.jpg)
