1 / 2
Glass Break Detector Dummy / Fake Alarm System / Burglary Prevention — image 1
1 / 2

Glass Break Detector Dummy / Fake Alarm System / Burglary Prevention

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.45 – €0.55 net (excluding VAT)

For file: GlassBreakDetector1-75_0.2mm_PLA_MK3S_31m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.50 excluding VAT (range midpoint).

Weight reported by the author
6 g
Print time reported by the author
30.6 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Many cities are frequently burglarized. Often, the burglars are not afraid to break a window.

Rating
0 / 5
Likes
32
Downloads
62
Makes
0
Views
1,467
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Many cities are frequently burglarized. Often, the burglars are not afraid to break a window.
At my home has already been broken into twice, in my job I often have to deal with burglaries and have made the experience that burglars are becoming increasingly brazen.
This dummy helps to prevent this from happening. Properly installed, it is very difficult to distinguish from the outside from a real one.
Real alarm systems are expensive. Burglars spy beforehand on the buildings they want to get into, so one of the most important measures is to give the impression that a burglary is difficult. A glass breakage detector is just one of many measures, but one that is quickly installed and gives the appearance of an existing alarm system.

Important:
The parts should be printed from white filament and also attached to the window with white double-sided tape. A piece of filament that is inserted into the part is sufficient as a "cable" (If necessary, use pliers to push the filament into the part). This can be sticked to the window frame with the help of the counterpart outside the visible area. I have also created a version with a 3mm hole, if you want to use a real cable for it.
The dummy should be placed on the side where the window is hinged and not where it opens, otherwise it is obvious from the outside that it is a dummy.

Tags