Gridfinity Bin Starter Set – 1×1, 2×1, 2×2, 3×2 (Any Size Generator)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Four spec-compatible Gridfinity bins with stacking lip, magnet pockets and M3 holes. Make any size in your browser.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Four Gridfinity bins built to the standard spec – 42 mm grid, 7 mm height units, stacking lip, underside nesting pocket, and Ø6 × 2 mm magnet pockets plus M3 screw holes at every unit corner.
1×1, 3 units
2×1, 3 units, 2 compartments
2×2, 3 units, 4 compartments
3×2, 6 units, 3 compartments
Need a different size or divider layout?
Any grid up to 6×6, any height, any number of compartments – free, no sign-up, runs in your browser:
https://3dmakerbench.com/gridfinity-bin-generator
Tips
Print opening up, as the files come – no supports.
2–3 walls is enough for most bins.
Magnets: 6 × 2 mm neodymium, press-fit.
Print settings
Layer height: 0.2 mm
Walls: 2–3
Infill: 15%
Supports: none
Material: PLA or PETG
Made with 3D MakerBench – free, browser-based 3D printing generators.